Marine propulsors are key components of the many thousands of ships and boats operating in oceans, lakes, and rivers around the world. The performance of propulsors are important for the environmental impact of ships, underwater noise impact on aquatic fauna, and crew and passenger comfort and safety. This book presents nineteen papers devoted to the hydrodynamics of different types of marine propulsors (conventional propellers, thrusters, and novel solutions). Most of the papers are extended papers from the sixth International Symposium on Marine Propulsors (SMP 2019). Several of the papers deal with cavitation, vortices, and energy saving devices. The papers present high-quality research performed using Computational Fluid Dynamics (CFD) and Experimental Fluid Dynamics (EFD) as well Artificial Intelligence (AI).

These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.

The Fourth International Symposium on Turbulent Shear Flows took place at Karlsruhe University in Germany. The papers presented at this Symposium encompassed a similar range to that of the previous meetings, with greater emphasis placed on experimental work, and continued a trend towards the examination of complex flows. Once again, three dimensional, recirculating and reacting flows featured strongly in the programme and were complemented by consideration of two-phase flows and discussions of both numerical and experimental techniques. The Symposium brought together some 300 participants from all over the world, and it was evident that there is a need for Turbulent Shear Flows Symposia, in order to obtain and communicate new information useful to researchers in the field of turbulent flows and of interest to engineers who design flow equipment. This volume contains 27 papers selected from more than 100 presentations at the Symposium which have been reviewed and edited before publication. Together they provide an indication of the status of current knowledge on the subjects represented at the Sympo sium. They are grouped into four sections, namely: • Fundamentals • Free Flows • Boundary Layers • Reacting Flows As in previous volumes in this series, each section begins with an introductory article con sidering the papers which follow in the broader context of available literature and current research.

Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.

This volume contains a selection of the papers presented at the Eighth Symposium on Turbulent Shear Flows held at the Technical University of Munich, 9-11 September 1991. The first of these biennial international symposia was held at the Pennsylvania State Uni versity, USA, in 1977; subsequent symposia have been held at Imperial College, London, England; the University of California, Davis, USA; the University of Karlsruhe, Ger many; Cornell University, Ithaca, USA; the Paul Sabatier University, Toulouse, France; and Stanford University, California, USA. The purpose of this series of symposia is to provide a forum for the presentation and discussion of new developments in the field of turbulence, especially as related to shear flows of importance in engineering and geo physics. From the 330 extended abstracts submitted for this symposium, 145 papers were presented orally and 60 as posters. Out of these, we have selected twenty-four papers for inclusion in this volume, each of which has been revised and extended in accordance with the editors' recommendations. The following four theme areas were selected after consideration of the quality of the contributions, the importance of the area, and the selection made in earlier volumes: - wall flows, - separated flows, - compressibility effects, - buoyancy, rotation, and curvature effects. As in the past, each section corresponding to the above areas begins with an introduction by an authority in the field that places the individual contributions in context with one another and with related research.

The inaugural Symposium on Turbulent Shear Flows was held at The Pennsylvania State University in 1977. Thereafter the locations for the biennial symposium have alternated between the USA and Europe. However, the ninth Symposium on Turbu lent Shear Flows was awarded to Japan in recognition of the strong support researchers of the Pacific Rim countries have given previous symposia. The University of Kyoto was the host institution and the meeting was held in the Inter national Conference Hall. The Local Arrangements Committee did a superb job scheduling traditional Japanese dinners and arranging visits to the many cultural treasures in the Kyoto region. The meeting attracted more than 260 offers of papers. Thirty-three sessions were scheduled to accommodate the 138 papers accepted for oral presentation. In addition a poster session was scheduled on each of the three days to accommodate a total of 42 poster presentations. From the presentations at the symposium 24 have been selected for inclusion in this volume. The authors of these papers have revised them taking into consideration comments made during their oral presentation and recommendations made by the Editors. Four subject areas are identified, namely closures and fundamentals, free flows, wall flows, and combustion and recirculating flows. Eminent authorities have prepared introductory articles fot each topic to put the individual contributions in context with each other and with related research.