Issue 16 July-Aug-Sept 2018

Issue 06 Jan-Feb-Mar 2015 Physical Mesomechanics And Spectrum Of Metal Surface Layer Excitation At Friction Process With Heavy Loading A.Kh. Janahmadov, N.G. Javadov The paper reviews the physical mesomechanics of structurally inhomogeneous media, developed on the verge of continuum mechanics (macro-level) and physics of plasticity and strength of deformable solids (micro-level). According to the concept of the structural level of deformation, at friction the surface layer of deformable solids is an independent leading functional subsystem. It is shown that with an increase of the deformation level of material, it develops autonomous processes (plasticity waves) inside, which have a significant impact on the staginess of plasticity flow localization and the destruction of contacting bodies, at the meso-level the deformation has a transitional-rotational character. Influence Of Wingtips On Induced Drag Force Of Rectangular Wing R.M. Jafarzade, M.H. Ilyasov, J.N. Huseynli The paper examines the influence of wingtips on the inductive resistance of rectangular wing through the mathematical model based on the distribution of vortices. Assuming that the free vortices originate at the wingtips – the imaginary Π-shape vortex diagram is built above the wing at the height of wingtips. The air is considered to be incompressible. Referring to the Biot-Savart formula, the expression for the inductive velocity, generated by the free vortices, and their average values along the wingspan are found. The induced drag force and its co- efficient are determined through the average bevel angle of flow. The inductive drag force is analytically proven. Application Of Coordination Polymers To Increase The Reservoir Oil Recovery B.T. Usubaliev, E.E. Ramazanova, F.T. Murvatov, E.N. Aliyev, Y.S. Salakhova, M.K. Munshieva, F.B. Aliyev, A.K. Rzaeva It is first time when an application of composite materials, BAF-1 BAF-2, on the basis of the co- ordination polymers is studied to improve the rheological properties of crude oil. It has been established that composite materials reduce the oil viscosity by 60-70% and also have a positive effect on other properties. Relaxation Of The Non-Equilibrium Field Effect In In2O3-SiO2-Si-SiO2-Al Structures At The Non-Equilibrium Depletion Regimes A.Z. Badalov, Sh.G. Zeynalova The article studies in detail the effect of various factors on the screening time of In2O3-SiO2- Si-SiO2-Al structures, the influence of the lighting temperature, and the supply voltage on the duration of the non-equilibrium non-stationary depletion process. It is also examines the dependence of the current depolarization on the power supply impulse duration with and without exposure to the LED light. The Theoretical Analysis Of Crude Oil Vapour Pressure And Cavitational Technologies Studying Of Physical And Chemical Properties Of Transported Oil In The Course Of Cavitation S.K. Gezalov We have worked out the criterion of fuzzy interval for minimizing target function with fuzzy coefficient. The given criterion shows adaptability of genetic algorithms for building pare-to-optimal solutions of multi-objective problem of transport logistics with fuzzy coefficient of objectives.

Issue 08 April-May-June 2016 Optimization Of Technological Processes For Machine Parts And Equipment Operating in Extreme Conditions A.M. Gafarov, P.G. Suleymanov, V.A. Gafarov The paper reviews the aspects of optimization of the technological processes for high-precision machine parts and equipment operating in extreme conditions. The obtained results are analyzed. Ratio Of Power Indicators In The System "Drilling String – Drive" B.A. Perminov, V.B. Perminov, Z.H. Yagubov, E.Z. Yagubov In the mode of drilling a well, transmission of rotation the drill string, occur from the wellhead to the bottom hole. Thus, at the expense to the impact dissipative forces on the drill string in the bore-hole may be stop of some part column, twisting of stretched portion and stall bottom of column with accelerate of rotation after accumulating a sufficient level of potential energy. The stock of potential energy in the elastic column at the rotation of upper part the greater, the more moment of resistance of stationary portion column. Take place redistribution of power indicators along the length of the drill string, that engender relaxation oscillations in the column, to the disruption of the dynamic balance, as condition of the column, so and system "drill string – drive", violates the dynamic stability of column and leads to a forced harmonic changes power of the drive of engine rig. In this regard, the definition of conditions for the occurrence of relaxation oscillations in the system “drill string – drive” is a very urgent task. Work is devoted to research of the power indicators of the drill string in the drilling operation and the definition of the necessary conditions for maintaining the dynamic equilibrium of the system. It was shown that the accumulation of potential energy in the bottom of the column is more than the kinetic energy of the upper part always provokes relaxation oscillations in the system. Makes recommendation, that to enhance the dynamic stability of the work regime is necessary increase the moment of inertia of the drive of column and reduce the weight of the bottom hole of column. Integrated Mechanisms For Data Security And Reliability In Information Systems Based On Theoretical Coding Schemes Kh.N. Rzaev The paper examines the cryptographic data protection to ensure the security of the data transfer through the means of information systems. The author carried out the comparative studies on the integrated security mechanisms to provide the reliability of transferred data by using the McEliece and Niederreiter (asymmetric) crypto-systems based on the m-tuple error-correcting codes. Application of Water-Flooding Method to Improve The Potential Oil Recovery D.A. Volchenko, G.F. Miralamov, V.R. Roznyi The paper examines the water-flooding method to improve the potential oil recovery by adjusting the properties of reagents in the water solution. Effect Of Abnormal Oil On Performance Of Well Bottom Zone T.Sh. Salavatov, I.I. Kirdoba, M.A. Dadashzadeh The article studies in detail the effect of various factors of the abnormal oil on the performance of well bottom zone.

Issue 03 Apr-May-June 2014 The Frictional Interaction In Electrical And Thermal Fields Of Metal Friction Pairs A.Kh. Janahmadov, A.I. Volchenko, E.S. Pirverdiev, D.A. Volchenko, N.A. Volchenko, D.Y. Zhuravlev The article examines the origins and development of the electrical and thermal explosions in the polymer lining subsurface layers, as well as the discharge penetrating through the layers of micro-protrusions. The Development Of Mathematical Models With “Skin-Factor” For The Petroleum Reservoir Filtration Ab.G. Rzaev, S.R. Rasulov, I.A. Abbasova, S.N. Rahimova The paper proposes a modified Dupuis formula, which describes the filtration process based on “skin-factor” of the polluted near oil-well area. The viability of proposed model is provided. The regularities of the reaction-regeneration cycles are established. The Safety Management Based On The Probabilistic Risk Assessment T.R. Jafarzade The probability estimation of potentially dangerous (basis) events is conducted on the basis of the current values of the risk factor given the risk significance of the individual components responsible for the flight safety. The flight is viewed as a random process described by a stochastic differential equation. The author raises the issue of absolute and guaranteed safety. The Mass-Transfer At The Wastewater Countercurrent Extraction Processes Inside Of The Spray Tower And Its Modeling A.A. Gasanov The wastewater treatment technology is developed on the basis of the solvent extraction using a spray extractor. In the paper the optimal process parameters are proposed and the consumption rates for continuous and dispersed phases are justified. The research results of the wastewater treatment produced by the paint and varnish manufacturers from butylglycol, phenilizopropanol, acetic acid and acetylacetone are included in the paper. The mathematical model of process is proposed; the specific area of the contact surface, the distance between the extractor cells, the coefficients of mass-impact and mass-transfer of the phase components are defined; the component concentrations in opposite phases and the aggregate height are calculated. The Deformation And Break Up Of Drops And Bubbles In The Isotropic Turbulent Flows G.I. Kelbaliyev, L.V. Guseynova, S.R. Rasulov, G.Z. Suleymanov The research paper is dedicated to the phenomena of deformation and break up of drops in the isotropic turbulent flow. The phenomena has been analyzed, modeled and compared with the experimental data. As a result of that research, the analytical solution is provided for the given problem, the expressions for estimation of the deformation level and the break up frequency depending on Red and Mo numbers have been obtained.

Issue 12 April-May-June 2017

Issue 02 Jan-Feb-Mar 2014 The Characteristic Analysis Of Changes In The Processes, Phenomena And Effects Within Working Layers Of Metal Polymer Pairs During Electro-Thermo-Mechanical Friction A.Kh. Janahmadov, A.I. Volchenko, M.Y. Javadov, D.A. Volchenko, N.A. Volchenko, E.A. Janahmadov The wave nature of changes in the external and internal characteristics of the metal polymer pairs at the electro-thermo-mechanical friction. The Research And Development Of The Highly Efficient Catalyst Of The C3-C4 Hydrocarbon Processing S.R. Rasulov, N.A. Salimova, G.R. Mustafaeva, L.V. Huseynova The effect of the different input methods of modifiers is studied: ion exchange, impregnation and dry mechanical mixing of catalytic properties of the zeolite base catalyst at the C3-C4 hydrocarbon conversion. The obtained quantitative data helps to identify the significant differences for the thermo-steaming and thermal activation of the modified catalyst exhibited during the conversion of the C3-C4 hydrocarbons and the selectivity of aromatic hydrocarbons. It is shown that the sample made of by the mechanical mixing with a subsequent high temperature treatment is most active.The regularities of the reaction-regeneration cycles are established. Technological Aspects Of Machine Parts Durability Improvements A.M. Gafarov, P.G. Suleymanov, V.A. Gafarov, F.M. Kalbiyev Based on the papers of national and foreign authors, the technological overview of the machine parts wear resistance is given in the paper. The obtained data is analyzed. The Study Of Factors Affecting On The Heating Of Elastic Elements Of The Coupling I.A. Khalilov The article studies the heating of the elastic element of the coupling depending on the influencing factors such as the damping capacity of the coupling, the ratio of the inertia moments in the driving and driven machinery details, the heat transfer coefficient and the cooling area of the of the elastic element of the coupling and the circumferential frequency of oscillation of the machinery driving system.

Issue 01 Oct-Nov-Dec 2013 The Multi-Fructural Analysis Of Fatigue Failure Under Friction Process A.M. Pashayev, A.Kh. Janahmadov, O.A. Dyshin, M.Y. Javadov The article shows the need to combine approaches of synergetics and fractals in the study of friction and wear in the frictional contact, due to fact that dissipative structures, self-organising in the open systems, are known to have a fractal behaviour The multi-fractal concept allows to introduce new quantitative structures, characterised by a spectrum of generalised fractal dimensions and reflected by the degree of randomness. Different levels of structure (micro-, mesa- and macro-scale) are described in the framework of multi-fractal analysis. A procedure to calculate the multi-fractal dimension of this structure is developed and the results of the numerical calculations are submitted.Research Of Loading Distribution On Coils Of Running Pair Of The LatchN.H.JavadovIt is given the calculation procedure of distribution of pressure on coils of running pair of latch at various loading schemes. Recommendations are provided for the choice of loading schemes of running pair, which ensures more uniform distributions and therefore, considerably reduces the wear of coils by means of constructive changes in a latch. Modeling And Forecasting The Financial Markets Using Theory Of Deterministic Chaos And Fractals S.M. Javadova This paper presents the results of the multi-fractal analysis based on the wavelet transformation, which can be considered as method of studying the spectral correlation properties of various processes, including non-stationary. Comparative experience with methods MFFA (multi-fractal fluctuation analysis) and WTMM (wavelet transform modulus maxima) in studying of the multi-fractal properties of signals of time function shows that MFFA method is more reliable and robust.As an instrument of the ‘local’ study of time function structure, WTMM allows to evaluate the correlation properties of random processes in comparison with a short signal. Surface Structures Of Frictional Materials On Asbestosfree Base M.I. Aliyev Development of asbestosfree composite materials on petroleum coke base enabled to obtain environmentally sound products with sufficiently high physical, mechanical and tribotechnical characteristics. The materials have been analyzed/tested from the perspective of physicochemical friction mechanics in the breaking mode through the differential-thermal analysis (DTA) and thermogravimetric analysis (TGM), supplemented with the study of friction materials structure. The thermogravimetric analysis findings indicated that decomposition of the new asbestosfree friction material begins after 14 minutes at 3000C.