This book focuses on the permeability of the foundation of dams, how to determine their state and how to tighten permeable rock to achieve safe foundations for large dams. It includes theoretical fundamentals as well as lessons learned in their application in practical construction work in eminent projects. It also discusses aspects such as the permeability of the rock mass at the dam site, including the hydraulic characteristics of water conducting openings and their effect on the reliability of water pressure test (WPT) results; the influence of particular geological factors on the hydrogeological regime at the site, as well as the hydrofracturing behavior and individual groutability; and the relationship between quantities of grout takes and the degree of impermeabilization.

Fifteen years have passed since I was working at a dam site super vising grouting work. That was not the first time that I had to car ry out engineering geological investigations for several similar projects, which always included testing programmes to find out the permeability of the rock, and often I was in charge of grouting work. It thus attracted my attention when this particular grouting programme did not run as intended: most of the grout holes took only very little grout! It could not be the aim of the invested work simply to drill holes and fill them again without bringing about any further improvement. Fortunately, I had the chance to be en gaged in many other grouting programmes in the following years and used all these examples to analyse as thoroughly as possible the permeability of the rocks being treated in view of their grout ability. The more I studied, the stronger my conviction grew that our rules which had decided the grouting of rock for many de cades should be developed further, and therefore I occupied my self with contributing some ideas for a new basis to investigation and judgment of permeability of rock and for a more adequate application of this technology.

This book focuses on the permeability of the foundation of dams, how to determine their state and how to tighten permeable rock to achieve safe foundations for large dams. It includes theoretical fundamentals as well as lessons learned in their application in practical construction work in eminent projects. It also discusses aspects such as the permeability of the rock mass at the dam site, including the hydraulic characteristics of water conducting openings and their effect on the reliability of water pressure test (WPT) results; the influence of particular geological factors on the hydrogeological regime at the site, as well as the hydrofracturing behavior and individual groutability; and the relationship between quantities of grout takes and the degree of impermeabilization.

This text methodically demonstrates the basic rules for the design criteria of earthfill and rockfill dams. It expertly guides the reader from preliminary work through the design of various embankment dams and on to the construction and finally the control of safety in completed structures.

Practical Guide to Grouting of Underground Structures presents a hands-on discussion of grouting fundamentals and provides a foundation for the development of practical specifications and field procedures. Employing a pragmatic approach to the subject of grouting, Raymond W. Henn concentrates on areas such as the types of drilling, mixing and pumping equipment, and their application. The book focuses on how cementitious grouting is used in conjunction with the excavation and lining of tunnels, shafts, and underground caverns in rock. Overviews of cementitious grouting in soils and chemical grouting are also provided. Topics covered range from record keeping to quality control and testing requirements, field operations, and production rates. Practical Guide to Grouting of Underground Structures is written as a useful handbook for engineers, construction supervisors, inspectors, and other professionals involved in the planning, design, and implementation of underground grouting programs.

Geotechnical Engineering of Dams, 2nd edition provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly those parts related to geology, can be used for concrete gravity and arch dams. All phases of investigation, design and construction are covered. Detailed descriptions are given from the initial site assessment and site investigation program through to the preliminary and detailed design phases and, ultimately, the construction phase. The assessment of existing dams, including the analysis of risks posed by those dams, is also discussed. This wholly revised and significantly expanded 2nd edition includes a lengthy new appendix on the assessment of the likelihood of failure of dams by internal erosion and piping. This valuable source on dam engineering incorporates the 200+ years of collective experience of the authors in the subject area. Design methods are presented in combination with their theoretical basis, to enable the reader to develop a proper understanding of the possibilities and limitations of a method. For its practical, well-founded approach, this work can serve as a useful guide for professional dam engineers and engineering geologists and as a textbook for university students.