Road vehicles, Diagnostic testing, Information exchange, Internet, Data transmission, Data transfer, Open systems interconnection, Computer networks, Interfaces (data processing), Electronic equipment and components, Control equipment

Diagnostic Communication with Road-Vehicles and Non-Road Mobile Machinery examines the communication between a diagnostic tester and E/E systems of road-vehicles and non-road mobile machinery such as agricultural machines and construction equipment. The title also contains the description of E/E systems (control units and in-vehicle networks), the communication protocols (e.g. OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.

Diagnostic Communication with Road-Vehicles and Non-Road Mobile Machinery examines the communication between a diagnostic tester and E/E systems of road-vehicles and non-road mobile machinery such as agricultural machines and construction equipment. The title also contains the description of E/E systems (control units and in-vehicle networks), the communication protocols (e.g. OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.

Road vehicles, Coding (programming), Electrical engineering, Power transmission systems, Specification (approval), Internet, Transport layer (OSI)

SAE J1979-3 describes the communication between the zero emissions propulsion systems and test equipment required by government regulations. Standardization regulations require passenger cars and light-, medium-, and heavy-duty trucks to support a minimum set of diagnostic information to external (off-board) "generic" test equipment.To achieve this, SAE J1979-3 is based on the Open Systems Interconnection (OSI) Basic Refer to Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers. When mapped on this model, the services specified are broken into: Application (layer 7), specified in: ISO 14229-1, ISO 14229-3 UDSonCAN, or ISO 14229-5 UDSonIP SAE J1979-3 ZEVonUDS Presentation layer (layer 6), specified in: SAE J1930, SAE J1930DA SAE J1979DA SAE J2012, SAE J2012DA SAE J1939DA, SAE J1939-73 Session layer services (layer 5), specified in: ISO 14229-2 Transport layer services (layer 4), specified in: DoCAN: ISO 15765-2 Transport protocol and network layer services ISO 15765-4 Requirements for emissions related systems DoIP: ISO 13400-2 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services Network layer services (layer 3), specified in: DoCAN: ISO 15765-2 Transport protocol and network layer services ISO 15765-4 Requirements for emissions related systems DoIP: ISO 13400-2 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services Data link layer (layer 2), specified in: DoCAN: ISO 15765-4, ISO 11898-1, -2 DoIP: ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3 Physical layer (layer 1), specified in: DoCAN: ISO 15765-4, ISO 11898-1, -2, in accordance with Table 1 DoIP: ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3 ISO 13400-4 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector SAE J1962 Diagnostic ConnectorNOTE: SAE J1979-3 provides a standard to satisfy known country-specific certification regulations. SAE J1979-3 is not considered a final authority for interpretation of the certification regulations, so users of this document should determine the applicability of capabilities defined in this document for their specific OBD regulatory requirements Due to regulatory adoption of OBDonUDS, SAE J1979 now becomes a multiple part document series: 1SAE J1979, which defines diagnostic test modes for OBDonEDS used for emissions OBD. 2SAE J1979-2, which defines the diagnostic services for OBDonUDS used for emissions OBD. 3SAE J1979-3 (ZEVonUDS), which defines the diagnostic services for electric, fuel cell, and other zero emissions propulsion systems.Market regulations specify which data links are allowed for sale in a given market.

This document provides the comprehensive list of Chinese National Standards - Category: GB/T; GBT.

This standard specifies the emission limits and test methods for gaseous and particulate pollutants as emitted by the vehicles equipped with compression ignition engine and its engines, as well as the emission limits and test methods for gaseous pollutants emitted from the ignition engine vehicles and its engine which use natural gas (NG) or liquefied petroleum gas (LPG) as fuel.