Ebook only (available soon) The report describes the principles of measurement of respiration rate, the transformation of measurement data into other types of information, and the application of the obtained information in process control strategies. Some fundamental concepts on biological respiration and process control are provided to assist the reader with understanding the principles. A structured overview comprises some eighty control strategies in which respirometry plays a role. To enable the reader to consult the information sources, an extensive literature list of over 500 references in included and classified into six themes. Contents Fundamentals of Respiration Measuring Principles Measured and Deduced Variables Elementary Control Concepts Respirometry in Control of the Activated Sludge Process Summary and Perspectives. Scientific and Technical Report No.7 Also Available Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies

Special Offer - Respirometry in Control of the Act

The respiration rate has generated much interest as a means of monitoring and controlling the activated sludge process because it is directly associated with both biomass growth and substrate removal. Respirometry has long been recognized as a valuable tool for controlling the activated sludge process, and as a result, many respirometry-based control strategies have been proposed in the literature. This study has developed a benchmark and methodology for conducting simulation studies to test the proposed control strategies within a complete and consistent set of process conditions. The benchmark consists of a complete set of influent conditions, a standard activated sludge plant configuration, models for the activated sludge process and the secondary clarification process, as well as values for the model parameters and initial values for the state variables. The benchmark provided the framework for the development of the simulation-based methodology. The methodology uses the benchmark, and includes a set of guidelines for implementing a control strategy in the benchmark plant and a set of tests for evaluating the performance and benefits of a proposed control system. The benchmark and methodology were then applied to test selected control strategies from the literature. (Abstract shortened by UMI.).

Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada

At the dawn of the 21st century, biotechnology is emerging as a key enabling technology for sustainable environmental protection and stewardship. Biotechnology for the Environment: Wastewater Treatment and Modeling, Waste Gas Handling illustrates the current technological applications of microorganisms in wastewater treatment and in the control of waste gas emissions. In the first section of the book special emphasis is placed on the use of rigorous mathematical and conceptual models for an in-depth understanding of the complex biology and engineering aspects underlying the operation of modern wastewater treatment installations. The second part addresses waste gas biofiltration, an expanding biotechnological application of microbial metabolism for air quality assurance through processes ranging from the abatement of hazardous volatile pollutants to the elimination of nuisance odors. It will be a valuable reference source for environmental scientists, engineers and decision makers involved in the development, evaluation or implementation of biological treatment systems. For more information on Strategy and Fundamentals, see Focus on Biotechnology, Volume 3A, and for more information on Soil Remediation, see Focus on Biotechnology, Volume 3B.