This book captures the state of the art of the durability of fibre-reinforced strain-hardening cement-based composites (SHCC) and the durability of structures or structural elements manufactured in full or in part with this class of modern construction materials. Highlights include: - Reflection on durability performance of existing applications in patch repair, a water reservoir and highway bridges. - Guidelines for tensile testing towards durability assessment of cracked SHCC. - New crack pattern related ingress rate indices for water and chloride into cracked SHCC. - The influence of low and high temperatures on SHCC durability performance. - The mechanism of crack control reducing ASR and corrosion rate, and results on chloride-induced corrosion of embedded steel reinforcement. - Self-healing of cracks in SHCC. - A conceptual durability design framework for SHCC and R/SHCC structures and members.

This book highlights the latest advances, innovations, and applications in cement-based materials (CBM) and concrete structures, as presented by leading international researchers and engineers at the International RILEM Conference on synergizing expertise toward sustainability and robustness of CBM and concrete structures (SynerCrete), held in Milos Island, Greece, on June 14-16, 2023. The aim of the conference was to discuss and arouse progress in research, development, and application of CBM and structural concrete through combination of expertise from distinct fields of knowledge, such as performance-based design, 3D modeling for analysis/design, building information modeling, and even robotics, while keeping focus on multiscale approaches at time and spatial levels. It covers a diverse range of topics concerning alternative concrete formulations for adaptation to climate change, performance-based and multiphysics/multiscale design and innovative testing, structural health monitoring and maintenance management, integral BIM-based planning, and resource-responsible building. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations. The two volumes encompass more than 200 original contributions in the field.

This work gives an overview of significant research from recent years concerning performance-based design and quality control for concrete durability and its implementation. In engineering practice, performance approaches are often still used in combination with prescriptive requirements. This is largely because, for most durability test methods, sufficient practical experience still has to be gained before engineers and owners are prepared to fully rely on them. This book, compiled by RILEM TC 230-PSC, is intended to assist efforts to successfully build the foundation for the full implementation of performance-based approaches through the exchange of relevant knowledge and experience between researchers and practitioners worldwide.

Strain-Hardening Fibre-Reinforced Cement-Based Composites (SHCC) were named after their ability to resist increased tensile force after crack formation, over a significant tensile deformation range. The increased resistance is achieved through effective crack bridging by fibres, across multiple cracks of widths in the micro-range. Whether these small crack widths are maintained under sustained, cyclic or other load paths, and whether the crack width limitation translates into durability through retardation of ingress of moisture, gas and other deleterious matter, are scrutinized in this book by evaluation of test results from several laboratories internationally. The durability of SHCC under mechanical, chemical, thermal and combined actions is considered, both for the composite and the fibre types typically used in SHCC. The compilation of this state-of-the-art report has been an activity of the RILEM TC 208-HFC, Subcommittee 2: Durability, during the committee life 2005-2009.

The book presents the work of the RILEM Technical Committee 249-ISC. Addressing the effective application of new recommendations for non-destructive in situ strength assessment of concrete, it provides information about the different steps of the investigation and processing of test results, until the delivery of strength estimates, and includes tables giving the minimum required number of cores in a variety of situations as well as several examples of how the recommendations can be used in practice. The book explores a topic which is of major importance, i.e. the assessment of concrete compressive strength in existing structures. This property (both mean and standard deviation) is a key input in many cases, such as the reinforcement of structures, the safety checking, the extension of service life. As the new RILEM recommendations imply a deep revision (and improvement) of field practice, the book is intended for managers of structures, structural engineers and specialists of NDT that have to answer these issues. More widely, it will benefit engineers and students who are interested in NDT and in the safety analysis of structures.