EPA estimates that thousands of premature deaths and cases of illnesses may be avoided by reducing air pollution. At the request of Congress, this report reviews the scientific basis of EPA's methods used in estimating the public health benefits from its air pollution regulations.

The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Carbon Pollution Emission Guidelines for Existing Stationary Sources - Electric Utility Generating Units (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Carbon Pollution Emission Guidelines for Existing Stationary Sources - Electric Utility Generating Units (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 In this action, the Environmental Protection Agency (EPA) is establishing final emission guidelines for states to follow in developing plans to reduce greenhouse gas (GHG) emissions from existing fossil fuel-fired electric generating units (EGUs). Specifically, the EPA is establishing: Carbon dioxide (CO 2) emission performance rates representing the best system of emission reduction (BSER) for two subcategories of existing fossil fuel-fired EGUs-fossil fuel-fired electric utility steam generating units and stationary combustion turbines; state-specific CO 2 goals reflecting the CO 2 emission performance rates; and guidelines for the development, submittal and implementation of state plans that establish emission standards or other measures to implement the CO 2 emission performance rates, which may be accomplished by meeting the state goals. This final rule will continue progress already underway in the U.S. to reduce CO 2 emissions from the utility power sector. This book contains: - The complete text of the Carbon Pollution Emission Guidelines for Existing Stationary Sources - Electric Utility Generating Units (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section