This book describes the practice of radiation thermometry, both at a primary level and for a variety of applications, such as in the materials processing industries and remote sensing. This book is written for those who will a) apply radiation thermometry in industrial practice b) use radiation thermometers for scientific research, c) the radiation thermometry specialist in a national measurement institute d) developers of radiation thermometers who are working to innovate products for instrument manufacturers and e) developers non-contact thermometry methods to address challenging thermometry problems. The author(s) of each chapter were chosen from a group of international scientists who are experts in the field and specialist(s) on the subject matter covered in the chapter. A large number of references are included at the end of each chapter as a resource for those seeking a deeper or more detailed understanding. This book is more than a practice guide. Readers will gain in-depth knowledge in: (1) the proper selection of the type of thermometer; (2) the best practice in using the radiation thermometers; (3) awareness of the error sources and subsequent appropriate procedure to reduce the overall uncertainty; and (4) understanding of the calibration chain and its current limitations. - Coverage of all fundamental aspects of the radiometric measurements - Coverage of practical applications with details on the instrumentation, calibration, and error sources - Authors are from the national labs internationally leading in R&D in temperature measurements - Comprehensive coverage with large number of references

This book describes the theory of radiation thermometry, both at a primary level and for a variety of applications, such as in the materials processing industries and remote sensing. This book is written for those who will apply radiation thermometry in industrial practice; use radiation thermometers for scientific research; the radiation thermometry specialist in a national measurement institute; developers of radiation thermometers who are working to innovate products for instrument manufacturers, and developers of non-contact thermometry methods to address challenging thermometry problems. The authors of each chapter were chosen from a group of international scientists who are experts in the field and specialists on the subject matter covered in the chapter. A large number of references are included at the end of each chapter as a resource for those seeking a deeper or more detailed understanding. This book is more than a practice guide, readers will gain in-depth knowledge in: (1) the proper selection of the type of thermometer; (2) the best practice in using the radiation thermometers; (3) awareness of the error sources and subsequent appropriate procedure to reduce the overall uncertainty; and (4) understanding of the calibration chain and its current limitations. - Covers all fundamental aspects of the radiometric measurements - Discusses practical applications with details on the instrumentation, calibration, and error sources - Authors are from leading national labs working in R&D of temperature measurements

In most field applications, broadband measurements are used where the spectral product of the source distribution and the meter’s spectral responsivity is measured. This book discusses detector-based radiometric, photometric, color, radiation-temperature, digital imaging-system, and LED measurements. It also shows that, while in photometry, the meter’s standard response covers only the visible, broadband measurements in the UV and IR require different standards. To avoid large errors when using a traditional detector- or source-standard, where the differences in the source distributions and in the meter’s responsivities produce large errors, the signal measurement procedure itself must be standardized. To satisfy the steps of the procedure, selected or properly designed meters should be used. This book is a guide to performing uniform broadband measurements with low uncertainty.

The recently developed optical radiation detectors need well-designed radiometers to perform improved radiometric, photometric, colorimetric, and radiation-temperature measurements. They can produce higher performance than traditionally used blackbody sources and lamps in wider application areas. This book presents research-based material in this field that has been implemented, realized, tested, verified, and evaluated. It can be used as a reference source for students, practicing scientists, engineers, technicians, instrument manufacturers and measurement/calibration people to learn, design, build, select, and use new generation radiometers. The book describes a number of design issues and applications to implement the correct input geometry for detectors to measure radiometric (power, irradiance and radiance) quantities, and DC, AC, and pulsed electrical output signals.

This book discusses modern, user-friendly radiometric practices that make it possible to convert from traditional source-based optical radiation measurements to the more efficient and higher accuracy detector-based applications and calibrations. It considers improved performance optical detector and radiometer standards including photometers and tristimulus colorimeters, and describes research-based design considerations, measurement of radiometric, optical, and electronic characteristics, and comparison of absolute-, transfer-, and working-standard detectors and radiometers from the ultraviolet (UV) to the infrared (IR) range. The book will serve to guide the optical radiation measurement community, researchers, manufacturers, calibration laboratories, students, and practicing engineers to switch from the old and limited-use measurement methods to the higher performance detector-based applications. The radiometer standards discussed here can be used to produce wide range radiometric, photometric, colour, and radiation temperature measurements with low uncertainty.