In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC--from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics. This handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does.

PVC Formulary, Third Edition, contains invaluable information for PVC manufacturers, processors and users. It discusses new product development and product engineering tools and the current state of the market for PVC products. This provides the reader with the critical data they need to formulate successful and durable products, and to evaluate formulations on the background of compositions used by others. Commercial types and grades, polymer forms, and physical-chemical properties of PVC are discussed in detail, with all essential information required for the decision-making process presented clearly to provide necessary data. The book contains over 600 formulations of products belonging to 23 categories that are derived from characteristic methods of production. A broad selection of formulations is used in each category to determine the essential components of formulations used in a particular method of processing, the most important parameters of successful products, troubleshooting information, and suggestions of further sources of information on the method of processing. The concept of this work and its companion book (PVC Degradation & Stabilization also published in 2020) is to provide the reader with complete information and data required to formulate successful and durable products and/or to evaluate formulations on the background of compositions used by others.

This ten chapter book on the manufacture and processing of PVC covers bulk processing, paste, emulsion, blends, toxicity, morphology, rigid PVC and plasticised PVC.

Polyvinyl chloride (PVC) has been around since the late part of the 19th century, although it was not produced commercially until the 1920s; it is the second largest consumed plastic material after polyethylene. PVC products can be rigid or flexible, opaque or transparent, coloured, and insulating or conducting. There is not just one PVC but a whole family of products tailor-made to suit the needs of each application. PVC is extremely cost effective in comparison to other plastics with a high degree of versatility in end-use and processing possibilities, as the reader will note from this book. It is durable, easily maintained, and can be produced in a large range of colours. As a result PVC finds use in an extensive range of applications in virtually all areas of human activity, including medical equipment, construction applications such as flexible roof membranes, pipes and window profiles, toys, automotive parts and electrical cabling. The PVC industry has also started to tackle some of its end-of-life issues. This practical guide provides comprehensive background on the resins and additives, their properties and processing characteristics, as well as discussion of product design and development issues. There have been, and still are, issues and perceptions over environmental and health acceptance covering vinyl chloride monomer, dioxins, phthalate plasticisers, and lead (and cadmium) based heat stabilisers and these are discussed in depth in this book. This book will be of interest to raw materials suppliers and processors or end-users of PVC, as well as anyone with a general interest in this versatile material: resins and additives properties and testing design issues processing, including post processing and assembly property enhancement sustainable development

A study on the production, properties and uses, of PVC, Polyvinyl chloride which is the world's third-most widely produced synthetic plastic polymer by the Institute of Materials, London in 1996

The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.

This report reviews the composition and synthesis of PVC, composition and formulation technology, compounding and manufacturing technology, and the additional range of materials made possible by blending with other polymers. It is completed by around 500 abstracts selected from the Rapra Polymer Library database.