This work contains guidelines which provide available information as to the pressure capabilities of relatively weak process vessels in the event of an internal explosion. The process industries wanted for a long time a structured method of manufacturing equipment that may be subject to dust explosions - enabling suitably proceted plant to withstand a transient explosion. Despite not covering all situations, this guide should help engineers calculate the strength of weak vessels and thus enable explosion venting and suppression systems to have a more consistent foundation and remove many of the difficultites associated with lack of knowledge of vessel strength.

This text, aimed at undergraduates, provides an introduction to process safety. It is intended to be of interest to a wide section of young engineers, but should also be a useful reference for professionals. Questions are included.

Originally published in three volumes by the Institution of Chemical Engineers from 1985 to 1988, this guide formed the first authoritative and comprehensive guide for dust explosion prevention and protection for engineers, scientists, safety specialists, and managers. This guide is a compilation of current best practices for measures to prevent dust explosions from occurring, and, if they do occur, to protect the plant and personnel from their destructive effects by applying the techniques of explosion containment, explosion suppression, and explosion venting. Included is new material on the containment and venting of dust explosions. This guide helps those responsible for the design, supply, and operation of process plants to comply with the provisions of health and safety legislation. Dust explosions can occur anywhere where combustible powders are handled, such as coal, wood, flour, starch, sugar, rubber, plastics, some metals, and pharmaceuticals. - Three classic volumes combined into one handy guide - Contains all of the best practices for preventing dust explosionsIncludes in-depth material that outlines how to protect the plant and its resources from explosions

Chemical process quantitative risk analysis (CPQRA) as applied to the CPI was first fully described in the first edition of this CCPS Guidelines book. This second edition is packed with information reflecting advances in this evolving methodology, and includes worked examples on a CD-ROM. CPQRA is used to identify incident scenarios and evaluate their risk by defining the probability of failure, the various consequences and the potential impact of those consequences. It is an invaluable methodology to evaluate these when qualitative analysis cannot provide adequate understanding and when more information is needed for risk management. This technique provides a means to evaluate acute hazards and alternative risk reduction strategies, and identify areas for cost-effective risk reduction. There are no simple answers when complex issues are concerned, but CPQRA2 offers a cogent, well-illustrated guide to applying these risk-analysis techniques, particularly to risk control studies. Special Details: Includes CD-ROM with example problems worked using Excel and Quattro Pro. For use with Windows 95, 98, and NT.

Containment Systems: A Design Guide is the only book that covers containment, specifically for the process industries. This Guide covers the range of containment equipment from simple air-flow control devices to enclosures that restrict exposures to well below a microgram per cubic meter averaged over a working day. The selection of a particular containment system for a particular transfer operation can be difficult because of the wide choice available. This Guide provides a structured approach to the selection process. - Covers the legislation for containment guidelines in the US, UK, and Europe - Provides an exhaustive list of containment equipment, including chapters on maintenance and reliability - Shows the engineer how to develop a containment strategy for his/her plant

Safety in the Process Industries tackles safety issues concerning the process industry. The book covers the various hazards, policies, and safety measures in the process industry. The first part of the text presents policies and case histories. Part II discusses the various hazards present in the process industry, such as electrical, fire, explosives, corrosive chemicals, and hardware. Part III tackles hazard control in design and maintenance. Part IV deals with other related topics that concern safety, such as management, safety training, and emergency planning. The book will be of great help to individuals involved in the management, development, planning, design, construction, operation, inspection, and maintenance of a process plant.