The main outcomes of RILEM TC-226-CNM are summarized in this book. Key input was provided by researchers from countries that are main contributors in the R&D, design, construction, operation, and regulation of waste nuclear reinforced concrete facilities. Nuclear power plants and many of the facilities and structures used for the management of radioactive waste materials generated by the fuel cycle use concrete in their construction. RILEM TC 226 CNM covered several areas including functional and performance requirements for concrete structures; degradation processes; phenomenological modelling, field experiences, tests approaches, instrumentation and monitoring methods dedicated to performance assessments; service-life models; aging Management of Nuclear Power Plants, repair techniques; codes and standards specific to radioactive waste facilities.

This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).

This volume gathers the latest advances, innovations and applications in the field of crack control in concrete, as presented by leading international researchers and engineers at the International RILEM Conference on Early-age and Long-term Cracking in RC Structures (CRC 2021), held in Paris, France on April 9, 2021. It covers early-age and long-term imposed deformations in concrete, analytical formulations for calculating crack widths in concrete, numerical simulations of early-age and long-term restrained behaviour of concrete elements, experimental investigations on cracking, on-site monitoring of imposed deformations and cracking, crack control and repair, and sustainability of design and remediation. The conference demonstrated that a comprehensive approach to this problem requires the design of robust experimental techniques, the development of multiscale models and the evaluation of code-based and other analytical approaches relevant to crack control in concrete. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

This work gives an overview of significant research from recent years concerning performance-based design and quality control for concrete durability and its implementation. In engineering practice, performance approaches are often still used in combination with prescriptive requirements. This is largely because, for most durability test methods, sufficient practical experience still has to be gained before engineers and owners are prepared to fully rely on them. This book, compiled by RILEM TC 230-PSC, is intended to assist efforts to successfully build the foundation for the full implementation of performance-based approaches through the exchange of relevant knowledge and experience between researchers and practitioners worldwide.

This book contains the full set of RILEM Recommendations which have been produced to enable engineers, specifiers and testing houses to design and produce concrete which will not suffer damage arising from alkali reactions in the concrete. There are five recommended test methods for aggregates (designated AAR-1 to AAR-5), and an overall recommendation which describes how these should be used to enable a comprehensive aggregate assessment (AAR-0). Additionally, there are two Recommended International Specifications for concrete (AAR-7.1 & 7.2) and a Preliminary International Specification for dams and other hydro structures (AAR-7.3), which describe how the aggregate assessment can be combined with other measures in the design of the concrete to produce a concrete with a minimised risk of developing damage from alkali-aggregate reactions.