Food safety is one of today's major concerns. One important factor in food safety is cleaning and sanitation of the equipment used in the food, dairy, beverage, brewery and hospitality industry. Cleanliness is a relevant factor; the public consumes more and more prepared or semi-prepared foods. The consequences of contamination can be catastrophic for the public and the economic and legal implications for the producer can be devastating. There have been several large and medium size enterprises bankrupted by a national recall of their contaminated products. This book was prepared with the practical and technical experience of many years working on real cases, improving in general the cleanliness and sanitation of the equipment where the food or beverage was prepared and packed. Know and apply these principles and you will reduce costs and improve cleanliness and sanitation. It is complemented with more than 50 spreadsheets of the most useful and used calculations. It includes an updated bibliography and important commercial references.

Large volume food processing and preparation operations have increased the need for improved sanitary practices from processing to consumption. This trend presents a challenge to every employee in the food processing and food prepara tion industry. Sanitation is an applied science for the attainment of hygienic conditions. Because of increased emphasis on food safety, sanitation is receiving increased attention from those in the food industry. Traditionally, inexperienced employees with few skills who have received little or no training have been delegated sanitation duties. Yet sanitation employees require intensive training. In the past, these employees, including sanitation program managers, have had only limited access to material on this subject. Technical information has been confined primarily to a limited number of training manuals provided by regulatory agen cies, industry and association manuals, and recommendations from equipment and cleaning compound firms. Most of this material lacks specific information related to the selection of appropriate cleaning methods, equipment, compounds, and sanitizers for maintaining hygienic conditions in food processing and prepara tion facilities. The purpose of this text is to provide sanitation information needed to ensure hygienic practices. Sanitation is a broad subject; thus, principles related to con tamination, cleaning compounds, sanitizers, and cleaning equipment, and specific directions for applying these principles to attain hygienic conditions in food processing and food preparation are discussed. The discussion starts with the importance of sanitation and also includes regulatory requirements and voluntary sanitation programs including additional and updated information on Hazard Analysis Critical Control Points (HACCP).

Finally, an up-to-date guide to cleaning and disinfection for the food preparation and processing industries. It discusses a host of examples from various food industries as well as topics universal to many industries, including biofilm formation, general sanitizing, and clean-in-place systems. Equally, the principles related to contamination, cleaning compounds, sanitizers and cleaning equipment are addressed. As a result, concepts of applied detergency are developed in order to understand and solve problems related to the cleaning and disinfection of laboratories, plants and other industrial environments where foods and beverages are prepared. Essential reading for food industry personnel.

This is the third edition of the Society of Dairy Technology's highly successful volume on Cleaning-in-Place (CIP). Already a well-established practice in dairy technology, CIP has become increasingly relevant in the processed food industry during the last 10-15 years, and the beverage industry has seen increased demands from customers regarding CIP verification and validation to provide improvements in plant hygiene and related efficiency. The book addresses the principles of cleaning operations, water supply issues and the science of detergents and disinfectants. Aspects of equipment design relevant to ease of cleaning are covered in a special chapter, as is the assessment of cleaning efficiency and the management of cleaning operations. This third edition features for the first time a chapter on membrane cleaning - a relatively new area requiring very specialised cleaning products and procedures. Useful data on fluid flow dynamics and laboratory test methods are also included in separate chapters. Authors have been selected from within industry, allied suppliers and academia to provide a balanced, leading edge assessment of the subject matter. Cleaning-in-Place is directed at dairy scientists and technologists in industry and academia, general food scientists and food technologists, food microbiologists and equipment manufacturers.

Comprehensive and accessible, Food Plant Sanitation presents fundamental principles and applications that are essential for food production safety. It provides basic, practical information on the daily operations in a food processing plant and reviews some of the industry's most recent developments. The book is unique from others on the topic in th

In this era of emphasis on food safety and security, high-volume food processing and preparation operations have increased the need for improved sanitary practices from processing to consumption. This trend presents a challenge for the food processing and food preparation industry. Now in its 5th Edition, the highly acclaimed Principles of Food Sanitation provides sanitation information needed to ensure hygienic practices and safe food for food industry personnel as well as students. The highly acclaimed textbook and reference addresses the principles related to contamination, cleaning compounds, sanitizers, cleaning equipment. It also presents specific directions for applying these concepts to attain hygienic conditions in food processing or food preparation operations. New features in this edition include: A new chapter on the concerns about biosecurity and food sanitation Updated chapters on the fundamentals of food sanitation, contamination sources and hygiene, Hazard Analysis Critical Control Points, cleaning and sanitizing equipment, and waste handling disposal Comprehensive and concise discussion about sanitation of low-, intermediate-, and high-moisture foods

The third edition of the Guide to Ship Sanitation presents the public health significance of ships in terms of disease and highlights the importance of applying appropriate control measures. It is intended to be a basis for the development of national approaches to controlling the hazards, providing a framework for policy-making and local decision-making. It may also be used as a reference for regulators, ship operators and ship builders as well as for assessing the potential health impact of projects involving the design of ships.