Pressure data were obtained for Mach five flows over winged reentry configurations composed of cylindrical cabins mounted on a 60 degree sweepback delta wing with a cylindrical leading edge, clipped tips, and trailing edge flaps. The model was tested with spherical and conical fronts on the cabin, with and without tip fins, and with and without a trailing edge spoiler. Flap deflections were varied from -40 to +40 degrees and the model was pitched at angles of attack from -30 to +45 degrees for a free stream Reynolds number, based on model length of 3,575,000. (Author)

"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

The report presents data obtained on the upper, flat plate, surface of the model and on the face of a 25% chord, full span, ramp mounted on the trailing edge of the flat plate. Data were obtained for three ramp angles, both with and without internal cooling of the flat plate surface, for model angles of attack from -43 to +10 degrees for free stream Reynolds numbers per foot of 1.1, 2.2 and 3.3 million.

Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.