Practical Machinery Safety aims to provide you with the knowledge to tackle machinery safety control problems at a practical level whilst achieving compliance with national and international standards. The book highlights the major international standards that are used to support compliance with EU regulations and uses these standards as a basis for the design procedures. It looks at the risk assessment processes used to identify hazards and to quantify the risks inherent in a machine. It introduces the concepts of safety categories as defined by standard EN954-1 (Safety of Machinery) and illustrates the principles of failsafe design, fault tolerance and self-testing. It also provides an introduction to machinery protection devices such as guards, enclosures with interlocks and guard-monitoring relays, locking systems, safety mats, photo-electric and electro-sensitive principles and the application of light curtains, a study of Safety Control System techniques, and introduces the principles of safety-certified PLCs. Plan and implement safety systems that deliver a safe working environment and compliance with national and international standards Apply simple risk assessments and hazard design methods to your own projects Identify hazards that occur with machinery and know how to deal with them

John Ridley and Dick Pearce, both recognized specialists in machinery safety, guide the reader through the various standards, regulations and best practices relating to the safe design and use of machinery and show which standard is relevant for which type of machine. Safety with Machinery provides a basic grounding in machinery safety and covers safeguarding philosophy and strategy, typical hazards, risk assessment and reduction, guarding techniques, ergonomic considerations, safe use of equipment and plant layout. All types of safeguards are discussed – mechanical, interlocking, electrical / electronic / programmable, hydraulic, pneumatic. The new edition has been updated throughout in line with changes in regulations and standards. The section on electric, electronic and programmable safety systems has been expanded to reflect their increasing importance. The book now focuses on the harmonised standards (e.g. EN ISO 13849, IEC/EN 61131-2) which can be used by manufacturers to self-certify their machines for the European market without the need for third party examination, but also covers other relevant standards (e.g. IEC 62061). Many practical examples set the regulations in context and assist in the interpretation of the various standards. Safety with Machinery is essential reading for all engineers involved in machinery design and maintenance all over the world as every machine sold within or into the EU needs to conform to the harmonised standards. It also provides health and safety professionals, students and employee representatives, as well as certification bodies, health and safety inspectors and safety regulators with a comprehensive overview of machinery safety.

Machine Guarding Handbook is a must-have reading for safety engineers and managers in manufacturing and other industrial settings who need to incorporate an effective machine guarding safety program, meet OSHA requirements, and protect workers. It provides a basic overview of OSHA's requirements, making compliance easier to achieve, thus preventing the risk of worker injury or mutilation and reducing the occurrence of costly penalties and OSHA audits. This 106-page book explores and discusses the hazards of unguarded machines, common safeguarding methods, the safeguarding of machines and robots, the importance of guarding, the varying methods of machine guarding, training, inspection and maintenance, and safeguarding techniques. In addition, it provides both regulatory information and the material required to implement a viable machine guarding program. Special features include a sample lockout/tagout program, checklists, a machine-guarding case study, chapter summaries, and the complete OSHA Machine Guarding and Lockout/Tagout Standards.

This totally revised, updated and expanded edition provides proven techniques and procedures that extend machinery life, reduce maintenance costs, and achieve optimum machinery reliability. This essential text clearly describes the reliability improvement and failure avoidance steps practiced by best-of-class process plants in the U.S. and Europe.

Component failures result from a combination of factors involving materials science, mechanics, thermodynamics, corrosion, and tribology. With the right guidance, you don’t have to be an authority in all of these areas to become skilled at diagnosing and preventing failures. Based on the author’s more than thirty years of experience, Practical Plant Failure Analysis: A Guide to Understanding Machinery Deterioration and Improving Equipment Reliability is a down-to-earth guide to improving machinery maintenance and reliability. Illustrated with hundreds of diagrams and photographs, this book examines... · When and how to conduct a physical failure analysis · Basic material properties including heat treating mechanisms, work hardening, and the effects of temperature changes on material properties · The differences in appearance between ductile overload, brittle overload, and fatigue failures · High cycle fatigue and how to differentiate between high stress concentrations and high operating stresses · Low cycle fatigue and unusual fatigue situations · Lubrication and its influence on the three basic bearing designs · Ball and roller bearings, gears, fasteners, V-belts, and synchronous belts Taking a detailed and systematic approach, Practical Plant Failure Analysis thoroughly explains the four major failure mechanisms—wear, corrosion, overload, and fatigue—as well as how to identify them. The author clearly identifies how these mechanisms appear in various components and supplies convenient charts that demonstrate how to identify the specific causes of failure.

The authors use their decades of experience and draw upon real-world examples to demonstrate that the application of their techniques provides a basis for equipment management, uptime maximization, and reduced maintenance costs. The text explores reliability assessment techniques such as Failure Mode, Effect Analysis, and Fault Tree Analysis of commonly encountered rotating machinery. These are all highly effective techniques that the engineer can apply to maximize uptime and thereby maximize production and profitability. *Provides the tools to drastically improve machinery productivity and performance *Bridges the gap between the theory of "reliability engineering" and the practical day-to-day measures that lead to machinery uptime *Authoritative reference for maximizing the uptime of process equipment

This is a book for engineers that covers the hardware and software aspects of high-reliability safety systems, safety instrumentation and shutdown systems as well as risk assessment techniques and the wider spectrum of industrial safety. Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering. This highly practical book focuses on efficiently implementing and assessing hazard studies, designing and applying international safety practices and techniques, and ensuring high reliability in the safety and emergency shutdown of systems in your plant. This book will provide the reader with the most up-to-date standards for and information on each stage of the safety life cycle from the initial evaluation of hazards through to the detailed engineering and maintenance of safety instrumented systems. It will help them develop the ability to plan hazard and risk assessment studies, then design and implement and operate the safety systems and maintain and evaluate them to ensure high reliability. Finally it will give the reader the knowledge to help prevent the massive devastation and destruction that can be caused by today's highly technical computer controlled industrial environments. * Helps readers develop the ability to plan hazard and risk assessment studies, then design, implement and operate the safety systems and maintain and evaluate them to ensure high reliability * Gives the reader the knowledge to help prevent the massive devastation that can be caused by today's highly technical computer controlled industrial environments * Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering