This paper reports on an investigation of the adequacy of Computational fluid dynamics (CFD), using a standard Reynolds Averaged Navier Stokes (RANS) model, for predicting dispersion of neutrally buoyant gas in a large indoor space. We used CFD to predict pollutant (dye) concentration profiles in a water filled scale model of an atrium with a continuous pollutant source. Predictions from the RANS formulation are comparable to an ensemble average of independent identical experiments. Model results were compared to pollutant concentration data in a horizontal plane from experiments in a scale model atrium. Predictions were made for steady-state (fully developed) and transient (developing) pollutant concentrations. Agreement between CFD predictions and ensemble averaged experimental measurements is quantified using the ratios of CFD-predicted and experimentally measured dye concentration at a large number of points in the measurement plane. Agreement is considered good if these ratios fall between 0.5 and 2.0 at all points in the plane. The standard k-epsilon two equation turbulence model obtains this level of agreement and predicts pollutant arrival time to the measurement plane within a few seconds. These results suggest that this modeling approach is adequate for predicting isothermal pollutant transport in a large room with simple geometry.

The air distribution in occupied spaces is a major issue of public concern. It is widely recognized that the quality of air and the nature of airflow can affect the health of occupants and the energy consumed in buildings and transport vehicles. ROOMVENT is the principal international conference in the field of air distribution. It was first initiated in 1987 by SCANVAC, the Scandinavian Federation of Heating, Ventilating and Sanitary Engineering Associations in Denmark, Finland, Iceland, Norway and Sweden. The aim of the Conference is to bring together researchers from universities and research institutes, engineers from industry and government officials and policy makers, with the goal of experiencing the latest techniques for measuring and analyzing indoor air flow, the visualization of indoor air flow patterns, the evaluation of ventilation parameters and the most recent developments in computer simulation techniques of room airflow. It is hoped that the theme of ROOMVENT 2000 "Ventilation for Health and Sustainable Environment" will set the scene for room air distribution research and development for the new millennium.

Discusses pollution from tobacco smoke, radon and radon progeny, asbestos and other fibers, formaldehyde, indoor combustion, aeropathogens and allergens, consumer products, moisture, microwave radiation, ultraviolet radiation, odors, radioactivity, and dirt and discusses means of controlling or eliminating them.

This volume contains a selection of the papers presented at the Eighth Symposium on Turbulent Shear Flows held at the Technical University of Munich, 9-11 September 1991. The first of these biennial international symposia was held at the Pennsylvania State Uni versity, USA, in 1977; subsequent symposia have been held at Imperial College, London, England; the University of California, Davis, USA; the University of Karlsruhe, Ger many; Cornell University, Ithaca, USA; the Paul Sabatier University, Toulouse, France; and Stanford University, California, USA. The purpose of this series of symposia is to provide a forum for the presentation and discussion of new developments in the field of turbulence, especially as related to shear flows of importance in engineering and geo physics. From the 330 extended abstracts submitted for this symposium, 145 papers were presented orally and 60 as posters. Out of these, we have selected twenty-four papers for inclusion in this volume, each of which has been revised and extended in accordance with the editors' recommendations. The following four theme areas were selected after consideration of the quality of the contributions, the importance of the area, and the selection made in earlier volumes: - wall flows, - separated flows, - compressibility effects, - buoyancy, rotation, and curvature effects. As in the past, each section corresponding to the above areas begins with an introduction by an authority in the field that places the individual contributions in context with one another and with related research.

This book presents selected papers from the 11th International Symposium on Heating, Ventilation and Air Conditioning (ISHVAC 2019), with a focus on HVAC techniques for improving indoor environment quality and the energy efficiency of heating and cooling systems. Presenting inspiration for implementing more efficient and safer HVAC systems, the book is a valuable resource for academic researchers, engineers in industry, and government regulators.

This book discusses energy transfer, fluid flow and pollution in built environments. It provides a comprehensive overview of the highly detailed fundamental theories as well as the technologies used and the application of heat and mass transfer and fluid flow in built environments, with a focus on the mathematical models and computational and experimental methods. It is a valuable resource for researchers in the fields of buildings and environment, heat transfer and global warming.