Introduction to PLC programming with OpenPLC, the first fully open source Programmable Logic Controller on the Raspberry Pi, and Modbus examples with Arduino Uno and ESP8286 PLC programming is very common in industry and home automation. This book describes how the Raspberry PI 4 can be used as a Programmable Logic Controller. Before taking you into the programming, the author starts with the software installation on the Raspberry PI and the PLC editor on the PC, followed by a description of the hardware. You'll then find interesting examples in the different programming languages complying with the IEC 61131-3 standard. This manual also explains in detail how to use the PLC editor and how to load and execute the programs on the Raspberry PI. All IEC languages are explained with examples, starting with LD (Ladder Diagram) over ST (Structured Control Language) to SFC (Special Function Chart). All examples can be downloaded from the author's website. Networking gets thorough attention too. The Arduino UNO and the ESP8266 are programmed as ModbusRTU or ModbusTCP modules to get access to external peripherals, reading sensors and switching electrical loads. I/O circuits complying with the 24V industry standard may also be of interest for the reader. The book ends with an overview of commands for ST and LD. After reading the book, the reader will be able to create his own controllers with the Raspberry PI.

IEC 61131-3 gives a comprehensive introduction to the concepts and languages of the new standard used to program industrial control systems. A summary of the special programming requirements and the corresponding features in the IEC 61131-3 standard make it suitable for students as well as PLC experts. The material is presented in an easy-to-understand form using numerous examples, illustrations, and summary tables. There is also a purchaser's guide and a CD-ROM containing two reduced but functional versions of programming systems.

This book is aimed at engineers, scientists and hobbyists who want to interface PCs with hardware projects using graphic user interfaces. Desktop and web based applications are covered. The programming language used is Python, an object-oriented scripting language; a higher level language than, say, C. The book guides you through starting with Linux by way of a free downloadable, live bootable distribution that can be ported around different computers without requiring hard drive installation. Practical demonstration circuits and downloadable, full software examples are presented that can be the basis for further projects. As well as discrete digital inputs and outputs, the examples cover 12 bit analog to digital inputs. The book also shows you how you can customise your own live Linux bootable CD to include your own projects. No complicated, elaborate, software development environment is used or even required.