This book presents recent developments in vibration control systems that employ embedded piezoelectric sensors and actuators, reviewing ways in which active vibration control systems can be designed for piezoelectric laminated structures, paying distinct attention to how such control systems can be implemented in real time. Includes numerous examples and experimental results obtained from laboratory-scale apparatus, with details of how similar setups can be built.

My objective in writing this book was to cross the bridge between the structural dynamics and control communities, while providing an overview of the potential of SMART materials for sensing and actuating purposes in active vibration c- trol. I wanted to keep it relatively simple and focused on systems which worked. This resulted in the following: (i) I restricted the text to fundamental concepts and left aside most advanced ones (i.e. robust control) whose usefulness had not yet clearly been established for the application at hand. (ii) I promoted the use of collocated actuator/sensor pairs whose potential, I thought, was strongly underestimated by the control community. (iii) I emphasized control laws with guaranteed stability for active damping (the wide-ranging applications of the IFF are particularly impressive). (iv) I tried to explain why an accurate pred- tion of the transmission zeros (usually called anti-resonances by the structural dynamicists) is so important in evaluating the performance of a control system. (v) I emphasized the fact that the open-loop zeros are more difficult to predict than the poles, and that they could be strongly influenced by the model trun- tion (high frequency dynamics) or by local effects (such as membrane strains in piezoelectric shells), especially for nearly collocated distributed actuator/sensor pairs; this effect alone explains many disappointments in active control systems.

Self sensing techniques allow using a piezoelectric transducer simultaneously as an actuator and as a sensor, as they reconstruct its mechanical sensory information by measuring its electrical quantities, i.e. voltage and charge. In vibration control applications piezoelectric self sensing actuators are highly desirable as they allow precise collocated control. Past research work was mainly based on the linear behavior of piezoelectric materials, thus restricting the operating driving voltages to low values. This work addresses the problem of using a self sensing piezoelectric actuator at its full driving voltage range. A new self sensing technique is proposed, which is based on the hysteretic modeling and identification of the piezoelectric transducer capacitance. After providing a sound presentation on piezoelectricity and vibrating structures, the most common self sensing techniques are discussed and the new self sensing technique is introduced and compared to typical linear methods both theoretically and experimentally.

Structural vibration control is an important issue and has received considerable research attention in many industry applications. Researches investigated various approaches to reduce undesirable vibrations. The smart materials can control and suppress vibration in an efficient and “intelligent” way without causing much additional weight. The majority of research in smart damping materials has focused on the control of composite structure using embedded or bonded piezoelectric transducers. The advantages of piezoelectric materials include high achievable bandwidth, compactness, lightness, easy implementation and good electromechanical coupling characteristics, thus making them appropriate for actuators and sensors applications. Recently, a non-linear semi-passive vibration control technique, so-called Synchronized Switch Damping (SSD), has been developed. SSD technique relies on a cumulative build-up of the voltage resulting from the continuous switching of the piezoelectric voltage and it was shown that the performance is strongly related to this total voltage amplitude available. Based on SSD techniques, a new global approach for improved vibration damping of smart structure, based on global energy redistribution by means of a network of piezoelectric elements is proposed in this thesis. The objective of this work is to propose a new approach to increase the piezoelectric voltage (also related to the damping operative energy) in order to improve the damping performance. In the proposed semi-active approach, the extra energy used to improve this voltage is gathered on the various modes of the structure using an interconnected piezoelectric element network. Two original network topologies are developed for transferring energy. One is named SSDT for “Synchronized Switch Damping by energy Transfer”. The second is defined as SSDD for “Synchronized Switch Damping with Diode”. Performance evaluations and comparisons are performed on a model representative of a clamped plate equipped with piezoelectric elements in the case of multimodal motion. Compared to the Modal-SSDI method used as a baseline, simulation results and a global theoretical model are proposed demonstrating the relationship between the achievable damping improvement and the ratio of transferred energy to the structure mechanical energy, thus proving the capability of a network of piezoelectric elements for global energy management and redistribution in order to improve the vibration damping of smart structures.

Adaptive Structural Systems with Piezoelectric Transducer Circuitry provides a comprehensive discussion on the integration of piezoelectric transducers with electrical circuitry for the development and enhancement of adaptive structural systems. Covering a wide range of interdisciplinary research, this monograph presents a paradigm of taking full advantage of the two-way electro-mechanical coupling characteristics of piezoelectric transducers for structural control and identification in adaptive structural systems. Presenting descriptions of algorithm development, theoretical analysis and experimental investigation, engineers and researchers alike will find this a valuable reference.

“Piezoelectric-Based Vibration-control Systems: Applications in Micro/Nano Sensors and Actuators” covers: Fundamental concepts in smart (active) materials including piezoelectric and piezoceramics, magnetostrictive, shape-memory materials, and electro/magneto-rheological fluids; Physical principles and constitutive models of piezoelectric materials; Piezoelectric sensors and actuators; Fundamental concepts in mechanical vibration analysis and control with emphasis on distributed-parameters and vibration-control systems; and Recent advances in piezoelectric-based microelectromechanical and nanoelectromechanical systems design and implementation.

This text is an introduction to the dynamics of active structures and to the feedback control of lightly damped flexible structures; the emphasis is placed on basic issues and simple control strategies that work. Now in its third edition, more chapters have been added, and comments and feedback from readers have been taken into account, while at the same time the unique premise of bridging the gap between structure and control has remained. Many examples and problems bring the subject to life and take the audience from theory to practice. The book has chapters dealing with some concepts in structural dynamics; electromagnetic and piezoelectric transducers; piezoelectric beam, plate and truss; passive damping with piezoelectric transducers; collocated versus non-collocated control; active damping with collocated systems; vibration isolation; state space approach; analysis and synthesis in the frequency domain; optimal control; controllability and observability; stability; applications; tendon control of cable structures; active control of large telescopes; and semi-active control. The book concludes with an exhaustive bibliography and index. This book is intended for structural engineers who want to acquire some background in vibration control; it can be used as a textbook for a graduate course on vibration control or active structures. A solutions manual is available through the publisher to teachers using this book as a textbook.