This immensely practical guide to PIV provides a condensed, yet exhaustive guide to most of the information needed for experiments employing the technique. This second edition has updated chapters on the principles and extra information on microscopic, high-speed and three component measurements as well as a description of advanced evaluation techniques. What’s more, the huge increase in the range of possible applications has been taken into account as the chapter describing these applications of the PIV technique has been expanded.

Results from several applications of particle image velocimetry (PIV) to unsteady flows at a laboratory scale have been published, and commercial products are now available for more general laboratory use, but for certain industrially important applications, reliable equipment is often available only from in-house research and development teams. This PIV handbookis intended to transfer know-how from PIV development laboratories to end-users in industry and universities. The book discusses the scientific and technical aspects required to set up a PIV system, allows users to assess the problems involved in the application of PIV, and enables them to design, optimize, and use PIV systems to meet their special needs.

Particle image velocimetry, or PIV, refers to a class of methods used in experimental fluid mechanics to determine instantaneous fields of the vector velocity by measuring the displacements of numerous fine particles that accurately follow the motion of the fluid. Although the concept of measuring particle displacements is simple in essence, the factors that need to be addressed to design and implement PIV systems that achieve reliable, accurate, and fast measurements and to interpret the results are surprisingly numerous. The aim of this book is to analyze and explain them comprehensively.

The Particle Image Velocimetry is undoubtedly one of the most important technique in Fluid-dynamics since it allows to obtain a direct and instantaneous visualization of the flow field in a non-intrusive way. This innovative technique spreads in a wide number of research fields, from aerodynamics to medicine, from biology to turbulence researches, from aerodynamics to combustion processes. The book is aimed at presenting the PIV technique and its wide range of possible applications so as to provide a reference for researchers who intended to exploit this innovative technique in their research fields. Several aspects and possible problems in the analysis of large- and micro-scale turbulent phenomena, two-phase flows and polymer melts, combustion processes and turbo-machinery flow fields, internal waves and river/ocean flows were considered.

This book summarizes the main results reached using the EC-funded network PivNet 2. It also presents a survey of the state of the art of scientific research using PIV techniques. You get a clear introduction to the basics of these techniques. The authors then guide you through current and possible future applications for flow analysis, including combustion and supersonic flow. Hundreds of illustrations, many in full color, are provided.

The aeronautics industry is presently aiming for faster design cycles and shorter time to market of new aircraft. It is looking at the same time for improved aerodynamic performance, for evident competitive reasons. Advanced, computer based design systems, including fast and reliable numerical flow solvers, have been developed in the last decade including new turbulence models. On the experimental side, measurement techniques in general have also been improved significantly, however the data evaluation process remains still very time consuming, and unsteady effects and turbulence are often not being captured with sufficient accuracy and detail. The development of Particle Image Velocimetry (PIV) has helped to improve the analysis of the flow fields. After investigations in laboratory scale wind tunnels, a joint initiative on PIV research, by the European Aerospace Research Establishments, within GARTEUR have enabled a wide breakthrough of this new technology in Europe. Within the Research Framework Program of the European Union, the joint research project EUROPIV aimed to apply PIV technology to problems of industrial interest.

The contents of this volume reflect to a large extent the efforts made by a group of Institutes at the ETH Zürich to develop new techniques for measurements of flows in fluids in the last decade. The motivation came from the study of tr~sport and mixing processes in natural and industrial systems. One of the characteristic properties of turbulence is its high mixing efficiency. The techniques developed are therefore suitable, although not exclusively, for turbulence measurements. They can be subdivided into point-measurements and field-measurements. The aim of the point-measurements developed is to determine the three components of the velocity and all their first derivatives with good temporal resolution and accuracy in turbulent flows. The old and weIl established method of hot-wire anemometry was used for this purpose. One of the main achievements in this context is the construction of miniature multi-wire probes. This technique was introduced to the Institute of Hydromechanics and Water Resources Management of ETH Zürich by Profs. A. Tsinober and E. Kit from Tel-Aviv University. This was made possible by the generous financial support by ETH, for which I would like to express my gratitude on this occasion. In addition, Dr. F.E. Joergensen from DANTEC contributed an example of recent developments in the hardware ofConstant Temperature Anemometry (CTA), for which I am very thankful.