This volume presents the analysis of optimal control problems for systems described by partial differential equations. The book offers simple and clear exposition of main results in this area. The methods proposed by the author cover cases where the controlled system corresponds to well-posed or ill-posed boundary value problems, which can be linear or nonlinear. The uniqueness problem for the solution of nonlinear optimal control problems is analyzed in various settings. Solutions of several previously unsolved problems are given. In addition, general methods are applied to the study of two problems connected with optimal control of fluid flows described by the Navier-Stokes equations.

At present, in order to resolve problems of ecology and to save mineral resources for future population generations, it is quite necessary to know how to maintain nature arrangement in an efficient way. It is possible to achieve a rational nature arrangement when analyzing solutions to problems concerned with optimal control of distributed systems and with optimization of modes in which main ground medium processes are functioning (motion of liquids, generation of temperature fields, mechanical deformation of multicomponent media). Such analysis becomes even more difficult because of heterogeneity of the region that is closest to the Earth surface, and thin inclusions/cracks in it exert their essential influence onto a state and development of the mentioned processes, especially in the cases of mining. Many researchers, for instance, A.N. Tikhonov - A.A. Samarsky [121], L. Luckner - W.M. Shestakow [65], Tien-Mo Shih, K.L. Johnson [47], E. Sanchez-Palencia [94] and others stress that it is necessary to consider how thin inclusions/cracks exert their influences onto development of these processes, while such inclusions differ in characteristics from main media to a considerable extent (moisture permeability, permeability to heat, bulk density or shear strength may be mentioned). Xll An influence exerted from thin interlayers onto examined processes is taken into account sufficiently adequately by means of various constraints, namely, by the conjugation conditions [4, 8, 10, 15, 17-20, 22-26, 38, 44, 47, 52, 53, 68, 76, 77, 81, 83, 84, 90, 95, 96-100, 112-114, 117, 123].

This book represents an extended and substantially revised version of my earlierbook, Optimal Control in Problems ofMathematical Physics,originally published in Russian in 1975. About 60% of the text has been completely revised and major additions have been included which have produced a practically new text. My aim was to modernize the presentation but also to preserve the original results, some of which are little known to a Western reader. The idea of composites, which is the core of the modern theory of optimization, was initiated in the early seventies. The reader will find here its implementation in the problem of optimal conductivity distribution in an MHD-generatorchannel flow.Sincethen it has emergedinto an extensive theory which is undergoing a continuous development. The book does not pretend to be a textbook, neither does it offer a systematic presentation of the theory. Rather, it reflects a concept which I consider as fundamental in the modern approach to optimization of dis tributed systems. Bibliographical notes,though extensive, do not pretend to be exhaustive as well. My thanks are due to ProfessorJean-Louis Armand and ProfessorWolf Stadler whose friendly assistance in translating and polishing the text was so valuable. I am indebted to Mrs. Kathleen Durand and Mrs. Colleen Lewis for the hard job of typing large portions of the manuscript.

The report is a survey of theoretical and computational methods in the field of optimal control of distributed parameter systems. This includes systems described by integral equations and partial differential equations. The various studies which have been done are grouped according to the method employed. A number of applications and potential applications of these methods are discussed, and certain deficiencies in the current state of knowledge are noted. Difficulties and opportunities in practical applications are discussed, and suggestions are offered for directions of research to render the results more readily usable. A list of references is included numbering more than 250 items: papers, report, and books.

This book focuses on the distributed control and estimation of large-scale networked distributed systems and the approach of distributed model predictive and moving horizon estimation. Both principles and engineering practice have been addressed, with more weight placed on engineering practice. This is achieved by providing an in-depth study on several major topics such as the state estimation and control design for the networked system with considering time-delay, data-drop, etc., Distributed MPC design for improving the performance of the overall networked system, which includes several classic strategies for different scenarios, details of the application of the distributed model predictive control to smart grid system and distributed water network. The comprehensive and systematic treatment of theoretical and practical issues in distributed MPC for networked systems is one of the major features of the book, which is particularly suited for readers who are interested to learn practical solutions in distributed estimation and optimization of distributed networked systems. The book benefits researchers, engineers, and graduate students in the fields of chemical engineering, control theory and engineering, electrical and electronic engineering, chemical engineering, and computer engineering, etc.