Radiation Measurement in Photobiology deals with the measurement of optical radiation and its application in photobiology. Optical radiation detectors as well as the calibration of light sources and detectors are discussed, together with techniques for spectroradiometry and broadband radiometry. Action spectroscopy and ultraviolet radiation dosimetry are also considered. Comprised of nine chapters, this volume begins with an introduction to the basic principles of light measurement, followed by a survey of optical radiation detectors based on physical principles and the problems associated with calibration. The next three chapters deal with important applications and extensions of these radiant measurements, including a short review of biological and medical users of lasers. The final three chapters on specialized studies and developments illustrate the wide diversity that exists in photobiology. These cover ultraviolet radiation dosimetry using polymer films, computer modeling of terrestrial ultraviolet radiation, and the "diffusion optics" in biological media. This book should be of interest to photobiologists.

This book discusses modern, user-friendly radiometric practices that make it possible to convert from traditional source-based optical radiation measurements to the more efficient and higher accuracy detector-based applications and calibrations. It considers improved performance optical detector and radiometer standards including photometers and tristimulus colorimeters, and describes research-based design considerations, measurement of radiometric, optical, and electronic characteristics, and comparison of absolute-, transfer-, and working-standard detectors and radiometers from the ultraviolet (UV) to the infrared (IR) range. The book will serve to guide the optical radiation measurement community, researchers, manufacturers, calibration laboratories, students, and practicing engineers to switch from the old and limited-use measurement methods to the higher performance detector-based applications. The radiometer standards discussed here can be used to produce wide range radiometric, photometric, colour, and radiation temperature measurements with low uncertainty.

Absolute Radiometry: Electrically Calibrated Thermal Detectors of Optical Radiation considers the application of absolute radiometry, a technique employed in optical radiation metrology for the absolute measurement of radiant power. This book is composed of eight chapters and begins with the principles of the absolute measurement of radiant power. The subsequent chapters provide the criteria associated with reflectance and transmittance of optical radiation and the parameters used to characterize the performance of radiation detectors. A chapter presents an analysis of the temperature distribution in a detector element. This topic is followed by discussions of the environmental and instrumental corrections in absolute radiometry. The final chapters deal with the alternative optical power scales and direct current substitution methods used in other fields of metrology.

Nearly a decade aga a general review article on the evaluation of optical radia tion hazards was published in Applied Optics (Sliney and Freasier, 1973). This arti cle received many favorable comments but also prompted many inquiries regarding specific optical hazard problems. From this it became evident that a monograph rather than a supplemental and expanded article was needed to fill this literature gap relating to laser and optical radiation hazards. The present work is designed to fill that gap, and is structured to permit either classroom or self-study use. Much of the material in this book was developed in eonnection with short courses on laser safety and radiometry in which we have participated, as weIl as from our previous articles. In particular, the sequenee of chapters is based upon the experiences which we have had in lecturing in courses with different schedules. One of the great difficulties in developing a text of this nature is that a broad, multidisciplinary background must be included in order that the reader can comprehend all of the subjeet matter readily. For this reason, the material presented on anatomy and physiology is orien ted toward the engineer or physical scientist, while the review material on basic optical physics is intended more for the physician or life scientist.

Applied Photometry, Radiometry, and Measurements of Optical Losses reviews and analyzes physical concepts of radiation transfer, providing quantitative foundation for the means of measurements of optical losses, which affect propagation and distribution of light waves in various media and in diverse optical systems and components. The comprehensive analysis of advanced methodologies for low-loss detection is outlined in comparison with the classic photometric and radiometric observations, having a broad range of techniques examined and summarized: from interferometric and calorimetric, resonator and polarization, phase-shift and ring-down decay, wavelength and frequency modulation to pulse separation and resonant, acousto-optic and emissive - subsequently compared to direct and balancing methods for studying free-space and polarization optics, fibers and waveguides. The material is focused on applying optical methods and procedures for evaluation of transparent, reflecting, scattering, absorbing, and aggregated objects, and for determination of power and energy parameters of radiation and color properties of light.

The recently developed optical radiation detectors need well-designed radiometers to perform improved radiometric, photometric, colorimetric, and radiation-temperature measurements. They can produce higher performance than traditionally used blackbody sources and lamps in wider application areas. This book presents research-based material in this field that has been implemented, realized, tested, verified, and evaluated. It can be used as a reference source for students, practicing scientists, engineers, technicians, instrument manufacturers and measurement/calibration people to learn, design, build, select, and use new generation radiometers. The book describes a number of design issues and applications to implement the correct input geometry for detectors to measure radiometric (power, irradiance and radiance) quantities, and DC, AC, and pulsed electrical output signals.

This book deals with the practice of Optical Radiation Measurements with introductory material to introduce the topics discussed. It will be most useful for students, scientists and engineers working in any academic, industrial or governmental projects related to optical radiation. The book contains chapters that treat in detail the procedures and techniques for the characterization of both sources and detectors to the highest degree of accuracy and reliability. It has a chapter devoted specifically to optical measurements of laser sources and fiberoptics for communication and a chapter devoted to uncertainty in measurement and its treatment with real examples of optical measurements. The book contains introductory materials that will allow a newcomer to radiometry to develop the expertise to perform exacting and accurate measurement. The authors stress the various causes of uncertainty in each phase of a measurement and thus allow for users to arrive at a correct assessment of their uncertainty of measurement in their particular circumstance.· Authors are from the Standards laboratories of AUSTRALIA, CANADA, ENGLAND, GERMANY and the USA.· Latest techniques and practice of laboratory measurements to achieve the highest accuracy in the use of sources or detectors.· Unique illustrations of the apparatus and measurement techniques.· Practical measurement examples of calibration with full uncertainty analysis.· Comprehensive treatment of optical standards such as sources, detectors and radiometers. · A complete chapter on laser power measurements and standards for fiber optic measurements· A complete chapter on correlations in radiometry and practical examples.· A chapter devoted to diffraction effects in radiometry