This book discusses modern, user-friendly radiometric practices that make it possible to convert from traditional source-based optical radiation measurements to the more efficient and higher accuracy detector-based applications and calibrations. It considers improved performance optical detector and radiometer standards including photometers and tristimulus colorimeters, and describes research-based design considerations, measurement of radiometric, optical, and electronic characteristics, and comparison of absolute-, transfer-, and working-standard detectors and radiometers from the ultraviolet (UV) to the infrared (IR) range. The book will serve to guide the optical radiation measurement community, researchers, manufacturers, calibration laboratories, students, and practicing engineers to switch from the old and limited-use measurement methods to the higher performance detector-based applications. The radiometer standards discussed here can be used to produce wide range radiometric, photometric, colour, and radiation temperature measurements with low uncertainty.

The recently developed optical radiation detectors need well-designed radiometers to perform improved radiometric, photometric, colorimetric, and radiation-temperature measurements. They can produce higher performance than traditionally used blackbody sources and lamps in wider application areas. This book presents research-based material in this field that has been implemented, realized, tested, verified, and evaluated. It can be used as a reference source for students, practicing scientists, engineers, technicians, instrument manufacturers and measurement/calibration people to learn, design, build, select, and use new generation radiometers. The book describes a number of design issues and applications to implement the correct input geometry for detectors to measure radiometric (power, irradiance and radiance) quantities, and DC, AC, and pulsed electrical output signals.

This is the first book to investigate the improved performance of optical radiation detectors developed from the ultraviolet to the far-infrared in the past two decades. The development and applications of these improved detectors opened up a new era in radiometric, photometric, colorimetric, and radiation-temperature measurements where earlier blackbody sources and lamps were used with lower performance and in limited application areas. This book will serve to help students, practicing scientists, engineers, technicians, and instrument manufacturers to learn, compare and select the proper detectors for building, using, and calibrating opto-electronic instruments with SI traceability and lowered measurement uncertainty in extended application areas.

This book deals with the practice of Optical Radiation Measurements with introductory material to introduce the topics discussed. It will be most useful for students, scientists and engineers working in any academic, industrial or governmental projects related to optical radiation. The book contains chapters that treat in detail the procedures and techniques for the characterization of both sources and detectors to the highest degree of accuracy and reliability. It has a chapter devoted specifically to optical measurements of laser sources and fiberoptics for communication and a chapter devoted to uncertainty in measurement and its treatment with real examples of optical measurements. The book contains introductory materials that will allow a newcomer to radiometry to develop the expertise to perform exacting and accurate measurement. The authors stress the various causes of uncertainty in each phase of a measurement and thus allow for users to arrive at a correct assessment of their uncertainty of measurement in their particular circumstance.· Authors are from the Standards laboratories of AUSTRALIA, CANADA, ENGLAND, GERMANY and the USA.· Latest techniques and practice of laboratory measurements to achieve the highest accuracy in the use of sources or detectors.· Unique illustrations of the apparatus and measurement techniques.· Practical measurement examples of calibration with full uncertainty analysis.· Comprehensive treatment of optical standards such as sources, detectors and radiometers. · A complete chapter on laser power measurements and standards for fiber optic measurements· A complete chapter on correlations in radiometry and practical examples.· A chapter devoted to diffraction effects in radiometry

'Sensors' is the first self-contained series to deal with the whole area of sensors. It describes general aspects, technical and physical fundamentals, construction, function, applications and developments of the various types of sensors. This volume provides a unique overview of optical sensors. Fundamentals, technical aspects, applications and various measuring techniques in the wide field of optics are described. It also covers light propagation, its measurement, the principles of photoelectric conversion as well as a survey of light sources, detectors and different kinds of optical parts. Five chapters describe detection schemes depending on wavelength, phase, and pulsetime. It also presents topics such as: Instruments approved in industry and novel concepts of optical sensors; Fiber and integrated optics as more recent techniques; Different techniques of optical sensing such as machine vision and signal processing, and for the determination surface morphology and deformation are covered. This volume is an indispensable reference work and text book for both specialists and newcomers, researchers and developers.

In most field applications, broadband measurements are used where the spectral product of the source distribution and the meter’s spectral responsivity is measured. This book discusses detector-based radiometric, photometric, color, radiation-temperature, digital imaging-system, and LED measurements. It also shows that, while in photometry, the meter’s standard response covers only the visible, broadband measurements in the UV and IR require different standards. To avoid large errors when using a traditional detector- or source-standard, where the differences in the source distributions and in the meter’s responsivities produce large errors, the signal measurement procedure itself must be standardized. To satisfy the steps of the procedure, selected or properly designed meters should be used. This book is a guide to performing uniform broadband measurements with low uncertainty.