This new authoritative resource presents the basics of network analyzer measurement equipment and troubleshooting errors involved in the on-wafer microwave measurement process. This book bridges the gap between theoretical and practical information using real-world practices that address all aspects of on-wafer passive device characterization in the microwave frequency range up to 60GHz. Readers find data and measurements from silicon integrated passive devices fabricated and tested in advance CMOS technologies. Basic circuit equations, terms and fundamentals of time and frequency domain analysis are covered. This book also explores the basics of vector network analyzers (VNA), two port S-parameter measurement routines, signal flow graphs, network theory, error models and VNA calibrations with the use of calibration standards.

Microwave systems are key components of every modern wireless communication system. The main objective of this book was to collect as many different state-of-the-art studies as possible in order to cover in a single volume the main aspects of microwave systems and applications. This book contains 17 chapters written by acknowledged experts, researchers, academics, and microwave engineers, providing comprehensive information and covering a wide range of topics on all aspects of microwave systems and applications. This book is divided into four parts. The first part is devoted to microwave components. The second part deals with microwave ICs and innovative techniques for on-chip antenna design. The third part presents antenna design cases for microwave systems. Finally, the last part covers different applications of microwave systems.

This groundbreaking book is the first to give an introduction to microwave de-embedding, showing how it is the cornerstone for waveform engineering. The authors of each chapter clearly explain the theoretical concepts, providing a foundation that supports linear and non-linear measurements, modelling and circuit design. Recent developments and future trends in the field are covered throughout, including successful strategies for low-noise and power amplifier design. This book is a must-have for those wishing to understand the full potential of the microwave de-embedding concept to achieve successful results in the areas of measurements, modelling, and design at high frequencies. With this book you will learn: - The theoretical background of high-frequency de-embedding for measurements, modelling, and design - Details on applying the de-embedding concept to the transistor's linear, non-linear, and noise behaviour - The impact of de-embedding on low-noise and power amplifier design - The recent advances and future trends in the field of high-frequency de-embedding - Presents the theory and practice of microwave de-embedding, from the basic principles to recent advances and future trends - Written by experts in the field, all of whom are leading researchers in the area - Each chapter describes theoretical background and gives experimental results and practical applications - Includes forewords by Giovanni Ghione and Stephen Maas

This chapter aims to describe experimental tools and techniques used for on-wafer millimeter (mm)-wave characterizations of silicon-based devices under the small-signal regime. We discuss the basics of scattering parameters (S parameters), high-frequency (HF) noise concept and measurement facilities, and expert details concerning experimental procedures. In this chapter, we describe first the basic notions of the S-parameters concept and its limitations, as well of as those HF noise. Secondly, the main experimental tools such as mm-wave vectorial network analyzer, noise setup, and on-wafer station are depicted. The third part concerns the description and the methodology of on-wafer calibration and de-embedding techniques applied for mm-wave advanced silicon devices. Finally, the last section focuses on the presentation and description of several examples of device characterizations. The main objective of this chapter is to propose a tradeoff between basic information and details of experience.

This chapter aims to describe methodologies and techniques for de-embedding device measurements from extrinsic measurements by characterizing the parasitic network surrounding the intrinsic device, through the use of a three-dimensional (3D) physical model of the network and its electromagnetic (EM) analysis. The electromagnetic behavior is obtained employing 3D EM solvers and internal ports. In the first part, the de-embedding processes for field-effect transistor (FET) devices to be used for monolithic microwave integrated circuit designs are studied by four different approaches; in the second part of this chapter, the de-embedding of FET devices for hybrid circuit design purposes is described.

One of the main issues in microwave and wireless system design is to ensure high performance with low cost techniques. The six-port technique helps allow for this in critical network design areas. This practical resource offers you a thorough overview the six-port technique, from basic principles of RF measurement based techniques and multiport design, to coverage of key applications, such as vector network analyzers, software defined radio, and radar. The first book dedicated to six-port applications and principles, this volume serves as a current, one-stop guide offering you cost-effective solutions for your challenging projects in the field.

Numerical Simulation - from Theory to Industry is the edited book containing 25 chapters and divided into four parts. Part 1 is devoted to the background and novel advances of numerical simulation; second part contains simulation applications in the macro- and micro-electrodynamics. Part 3 includes contributions related to fluid dynamics in the natural environment and scientific applications; the last, fourth part is dedicated to simulation in the industrial areas, such as power engineering, metallurgy and building. Recent numerical techniques, as well as software the most accurate and advanced in treating the physical phenomena, are applied in order to explain the investigated processes in terms of numbers. Since the numerical simulation plays a key role in both theoretical and industrial research, this book related to simulation of many physical processes, will be useful for the pure research scientists, applied mathematicians, industrial engineers, and post-graduate students.