Longitudinal joints are one of the critical factors that cause premature pavement failure. Poor-quality joints are characterized by a low density and high permeability; which generates surface distresses such as ravelling or longitudinal cracking. Density has been traditionally considered as the primary performance indicator of joint construction. Density measurements consist of taking cores in the field and determining their density in the laboratory. Although this technique provides the most accurate measure of joint density, it is destructive and time consuming. Nuclear and non-nuclear gauges have been used to evaluate the condition of longitudinal joint non-destructively, but did not show good correlation with core density tests. Consequently, agencies are searching for other non-destructive testing (NDT) options for longitudinal joints evaluation. NDT methods have significantly advanced for the evaluation of pavement structural capacity during the past decade. These methods are based either on deflection or wave velocity measurements. The light weight deflectometer (LWD) is increasingly being used in quality control/quality assurance to provide a rapid determination of the surface modulus. Corresponding backcalculation programs are able to determine the moduli of the different pavement layers; these moduli are input parameters for mechanistic-empirical pavement design. In addition, ultrasonic wave-based methods have been studied for pavement condition evaluation but not developed to the point of practical implementation. The multi-channel analysis of surface waves (MASW) consists of using ultrasonic transducers to measure surface wave velocities in pavements and invert for the moduli of the different layers. In this study, both LWD and MASW were used in the laboratory and in the field to assess the condition of longitudinal joints.

The proceedings of June 1993 international symposium held in Atlanta, Georgia, called specifically to develop and standardized evaluation procedures for non-destructive methods of testing pavements. The 29 papers discuss analytical models and techniques, measurement and calculation techniques in the field and laboratory, problems and errors associated with backcalculation methods and design parameters, and testing for other pavement uses. Also includes a history of the quest for a standard and the status of that effort. Reproduced from typescripts. Annotation copyright by Book News, Inc., Portland, OR

As with the previous two symposia, the 32 papers from the June/July, 1999, Seattle symposium present advances in the nondestructive testing of pavements using conventional falling weight deflectometer techniques and other promising techniques such as ground penetrating radar, rolling weight deflecto