The papers from this Institution of Mechanical Engineers seminar examine noise control and measurement techniques. The papers also address noise attenuation and the more fundamental problems of identifying sources of noise and developing techniques for the design of reduced noise fluid machinery. measurement in fluid machinery, development in analysis techniques, prediction of sound pressure levels from specified sound power levels (from room effects, effect of adjacent equipment, noise break out), identification of noise sources, attentuation of noise-silencers, lagging, material selection and thickness, active noise control, designs for reduced noise, acceptance standards for plant, operating and troubleshooting case histories.

This book focuses on hydraulic components and machines, and illustrates how a machine's noise-radiating surfaces affect noise. It reviews the basics and terminology of sound, vibration, vibration isolation, fluid pulsations, Fourier analysis, cavitation, hydraulic shock, and enclosure design.

An Introduction to Turbulence and Its Measurement is an introductory text on turbulence and its measurement. It combines the physics of turbulence with measurement techniques and covers topics ranging from measurable quantities and their physical significance to the analysis of fluctuating signals, temperature and concentration measurements, and the hot-wire anemometer. Examples of turbulent flows are presented. This book is comprised of eight chapters and begins with an overview of the physics of turbulence, paying particular attention to Newton's second law of motion, the Newtonian viscous fluid, and equations of motion. After a chapter devoted to measurable quantities, the discussion turns to some examples of turbulent flows, including turbulence behind a grid of bars, Couette flow, atmospheric and oceanic turbulence, and heat and mass transfer. The next chapter describes measurement techniques using hot wires, films, and thermistors, as well as Doppler-shift anemometers; glow-discharge or corona-discharge anemometers; pulsed-wire anemometer; and steady-flow techniques for fluctuation measurement. This monograph is intended for post-graduate students of aeronautics and fluid mechanics, but should also be readily understandable to those with a good general background in engineering fluid dynamics.

The third edition of Engineering Noise Control has been thoroughly revised, updated and extended. Each chapter contains new material, much of which is not available elsewhere. The result is a comprehensive discussion of the theoretical principles and concepts of acoustics and noise control, a detailed discussion of the hearing mechanism, noise measuring instrumentation and techniques, noise criteria, sound source characterization and emission, outdoor sound propagation, sound in rooms, sound transmission through partitions, enclosure design, dissipative and reactive mufflers, vibration isolation, equipment sound power emission calculations and active noise cancellation. The book is an excellent text for advanced undergraduate or graduate students of acoustic and noise control, and it also contains essential information and prediction techniques that make it an invaluable resource for the practitioner.

The practice of engineering noise control demands a solid understanding of the fundamentals of acoustics, the practical application of current noise control technology and the underlying theoretical concepts. This fully revised and updated fourth edition provides a comprehensive explanation of these key areas clearly, yet without oversimplification. Written by experts in their field, the practical focus echoes advances in the discipline, reflected in the fourth edition’s new material, including: completely updated coverage of sound transmission loss, mufflers and exhaust stack directivity a new chapter on practical numerical acoustics thorough explanation of the latest instruments for measurements and analysis. Essential reading for advanced students or those already well versed in the art and science of noise control, this distinctive text can be used to solve real world problems encountered by noise and vibration consultants as well as engineers and occupational hygienists.

Each number is the catalogue of a specific school or college of the University.