What is Vehicle Infrastructure Integration Vehicle infrastructure integration (VII) is an initiative fostering research and application development for a series of technologies directly linking road vehicles to their physical surroundings, first and foremost to improve road safety. The technology draws on several disciplines, including transport engineering, electrical engineering, automotive engineering, and computer science. VII specifically covers road transport, although similar technologies are in place or under development for other modes of transport. Planes, for example, use ground-based beacons for automated guidance, allowing the autopilot to fly the plane without human intervention. In highway engineering, improving the safety of a roadway can enhance overall efficiency. VII targets to improve both safety and efficiency. How you will benefit (I) Insights, and validations about the following topics: Chapter 1: Vehicle Infrastructure Integration Chapter 2: Intelligent Transportation System Chapter 3: Dedicated Short-Range Communications Chapter 4: Vehicular Communication Systems Chapter 5: Vehicular Ad Hoc Network Chapter 6: Research and Innovative Technology Administration Chapter 7: Connected Car Chapter 8: Intelligent Speed Assistance Chapter 9: GNSS Road Pricing Chapter 10: Safety of Cycling Infrastructure (II) Answering the public top questions about vehicle infrastructure integration. (III) Real world examples for the usage of vehicle infrastructure integration in many fields. Who this book is for Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of Vehicle Infrastructure Integration.

Millions of automobile accidents occur worldwide each year. Some of the most serious are rear-end crashes, side crashes within intersections, and crashes that occur when cars change lanes or drift into a lane. The holy grail of traffic safety is to avoid automobile accidents altogether. To that end, major automakers, governments, and universities are working on systems that allow vehicles to communicate with one another as well as the surrounding infrastructure (V2V/V2I for short). These systems show promise for such functions as intersection assist, left-turn assist, do-not-pass warning, advance warning of a vehicle braking ahead, forward-collision warning, and blind-spot/lane-change warning. This compendium explores the challenges in developing these systems and provides the latest developments in V2V/V2I technology. It begins with a series of overview news stories and articles from SAE’s magazines on the progress in this technology. This is followed by a series of technical papers on V2V/V2I dealing with the many technical aspects of design of these systems as well as discussions of such key issues as the need for extreme reliability assurances and traffic congestion overloads on the systems. Some of most interesting discussions in the book include: • Overview of a large-scale test in Germany to address reliability. • Effectiveness of different antennas and receivers that are used in various intersections settings, such as intersections where there are tall buildings or no buildings, and where high transmission power lines are located that can cause signal interference. • Various ways to communicate between vehicles and how messages are relayed to drivers. • Dedicated short range communication protocol for vehicle safety applications, which shows promise for combining and processing large amounts of information. Editor Ronald K. Jurgen prepared this book to be of use to engineers at automakers and electronic component suppliers; software engineers; computer systems analysts and architects; academics and researchers within the electronics, computing, and automotive industries; legislators, managers and other decision-makers in the government highway sector; traffic safety professionals; and insurance and legal practitioners. Mr. Jurgen served on the editorial staff of IEEE Spectrum for 30 years and is the editor of several electronics-related handbooks and several other electronics-related compendiums published by SAE International.

Millions of automobile accidents occur worldwide each year. Some of the most serious are rear-end crashes, side crashes within intersections, and crashes that occur when cars change lanes or drift into a lane. The holy grail of traffic safety is to avoid automobile accidents altogether. To that end, major automakers, governments, and universities are working on systems that allow vehicles to communicate with one another as well as the surrounding infrastructure (V2V/V2I for short). These systems show promise for such functions as intersection assist, left-turn assist, do-not-pass warning, advance warning of a vehicle braking ahead, forward-collision warning, and blind-spot/lane-change warning. This compendium explores the challenges in developing these systems and provides the latest developments in V2V/V2I technology. It begins with a series of overview news stories and articles from SAE’s magazines on the progress in this technology. This is followed by a series of technical papers on V2V/V2I dealing with the many technical aspects of design of these systems as well as discussions of such key issues as the need for extreme reliability assurances and traffic congestion overloads on the systems. Some of most interesting discussions in the book include: • Overview of a large-scale test in Germany to address reliability. • Effectiveness of different antennas and receivers that are used in various intersections settings, such as intersections where there are tall buildings or no buildings, and where high transmission power lines are located that can cause signal interference. • Various ways to communicate between vehicles and how messages are relayed to drivers. • Dedicated short range communication protocol for vehicle safety applications, which shows promise for combining and processing large amounts of information. Editor Ronald K. Jurgen prepared this book to be of use to engineers at automakers and electronic component suppliers; software engineers; computer systems analysts and architects; academics and researchers within the electronics, computing, and automotive industries; legislators, managers and other decision-makers in the government highway sector; traffic safety professionals; and insurance and legal practitioners. Mr. Jurgen served on the editorial staff of IEEE Spectrum for 30 years and is the editor of several electronics-related handbooks and several other electronics-related compendiums published by SAE International.

Vehicle infrastructure integration (VII) is an emerging approach intended to create an enabling communication capability to support vehicle-to-vehicle and vehicle-to-infrastructure communications for safety and mobility applications. The Virginia Department of Transportation (VDOT) has been an active participant in the national VII development effort. This research project critically assessed national development activities and quantitatively evaluated two potential VII-enabled system operation applications: traffic monitoring and signal control. The results of the research effort provide tangible evidence of the potential that VII holds in helping VDOT improve its ability to operate the transportation system. The benefits demonstrated in traffic monitoring and signal control indicate that VDOT should remain active in VII development. However, the research results also illustrate the uncertainty that currently exists in the national VII development effort. Because of this uncertainty, large investments in field deployment of "early" VII equipment were found to constitute an unnecessarily risky action. The results of the research support the conclusion that VDOT should partner with other states and the U.S. Department of Transportation to develop the new generations of system operations applications that will take full advantage of VII capabilities once the technology development converges at the national level. In addition, VDOT should critically examine current equipment standards to ensure that new purchases of items, such as traffic signal controllers, provide the flexibility for VII upgrades in the near future.

Compiled from papers of the 4th Biennial Workshop on DSP (Digital Signal Processing) for In-Vehicle Systems and Safety this edited collection features world-class experts from diverse fields focusing on integrating smart in-vehicle systems with human factors to enhance safety in automobiles. Digital Signal Processing for In-Vehicle Systems and Safety presents new approaches on how to reduce driver inattention and prevent road accidents. The material addresses DSP technologies in adaptive automobiles, in-vehicle dialogue systems, human machine interfaces, video and audio processing, and in-vehicle speech systems. The volume also features recent advances in Smart-Car technology, coverage of autonomous vehicles that drive themselves, and information on multi-sensor fusion for driver ID and robust driver monitoring. Digital Signal Processing for In-Vehicle Systems and Safety is useful for engineering researchers, students, automotive manufacturers, government foundations and engineers working in the areas of control engineering, signal processing, audio-video processing, bio-mechanics, human factors and transportation engineering.