The Theory and Practice of Scintillation Counting is a comprehensive account of the theory and practice of scintillation counting. This text covers the study of the scintillation process, which is concerned with the interactions of radiation and matter; the design of the scintillation counter; and the wide range of applications of scintillation counters in pure and applied science. The book is easy to read despite the complex nature of the subject it attempts to discuss. It is organized such that the first five chapters illustrate the fundamental concepts of scintillation counting. Chapters 6 to 10 detail the properties and applications of organic scintillators, while the next four chapters discuss inorganic scintillators. The last two chapters provide a review of some outstanding problems and a postscript. Nuclear physicists, radiation technologists, and postgraduate students of nuclear physics will find the book a good reference material.

This book covers the most common neutron detectors used in neutron scattering facilities and all of those in use at Oak Ridge National Lab. It starts describing the facilities, instruments and the critical detector parameters needed by various instruments. Then the key components of the 3He-based linear position-sensitive detectors as well as on their electronics, which require particular attention to signal processing and noise reduction, are introduced. One chapter is dedicated to the 3He alternatives where scintillators play a critical role. It also covers emerging neutron detection technologies including semiconductors, vacuum-based devices and their associated readouts, which will be required in the future for high rate and high-resolution neutron detectors. The authors explain the logic behind the choice of materials as well as the various constraints that neutron detectors must respect to be useful. Some of these constraints, such as efficiency and gamma-ray sensitivity are common to all neutron counters while others, like timing resolution, dynamic range, and peak counting rate, depend on the applications. The book guides experts, the nuclear science community, and young scholars through the physical processes and the required electronics in a way that is accessible for those not professionally involved in designing detector’s components and electronic circuits.

It is the purpose of this paper to describe a neutron detector suitable for monitoring a flux of neutrons whose energy is greater than about 50 Mev. Detection of the neutrons is accomplished by their ability to induce fission in heavy elements. Kelly and Wiegand studied the neutron fission of Bi, Pb, Ti, Hg, Au, and Pt at various neutron energies and the presently described counter is an application of this work.

A child speculates about sleeping next to various animals in various places other than one's own, and most desirable, warm bed.

This book provides a comprehensive and up-to-date introduction to the fundamental theory and applications of slow-neutron scattering.

Neutron detection is an important aspect of materials protection, accounting, and control for transmutation (MPACT). Currently He-3 filled thermal neutron detectors are utilized in many applications; these detectors require high-voltage bias for operation, which complicates the system when multiple detectors are used. In addition, due to recent increase in homeland security activity and the nuclear renaissance, there is a shortage of He-3, and these detectors become more expensive. Instead, cheap solid-state detectors that can be mass produced like any other computer chips will be developed. The new detector does not require a bias for operation, has low gamma sensitivity, and a fast response. The detection system is based on a honeycomb-like silicon device, which is filled with B-10 as the neutron converter; while a silicon p-n diode (i.e., solar cell type device) formed on the thin silicon wall of the honeycomb structure detects the energetic charged particles emitted from the B-10 conversion layer. Such a detector has ~40% calculated thermal neutron detection efficiency with an overall detector thickness of about 200?m. Stacking of these devices allows over 90% thermal neutron detection efficiency. The goal of the proposed research is to develop a high-efficiency, low-noise, self-powered solid-state neutron detector system based on the promising results of the existing research program. A prototype of this solid-state neutron detector system with sufficient detector size (up to 8-inch diam., but still portable and inexpensive) and integrated with interface electronics (e.g., preamplifier) will be designed, fabricated, and tested as a coincidence counter for MPACT applications. All fabrications proposed are based on silicon-compatible processing; thus, an extremely cheap detector system could be massively produced like any other silicon chips. Such detectors will revolutionize current neutron detection systems by providing a solid-state alternative to traditional gas-based neutron detectors.