This book presents WHO guidelines for the protection of public health from risks due to a number of chemicals commonly present in indoor air. The substances considered in this review, i.e. benzene, carbon monoxide, formaldehyde, naphthalene, nitrogen dioxide, polycyclic aromatic hydrocarbons (especially benzo[a]pyrene), radon, trichloroethylene and tetrachloroethylene, have indoor sources, are known in respect of their hazardousness to health and are often found indoors in concentrations of health concern. The guidelines are targeted at public health professionals involved in preventing health risks of environmental exposures, as well as specialists and authorities involved in the design and use of buildings, indoor materials and products. They provide a scientific basis for legally enforceable standards.

Defines in non-technical language the more commonly used environmental terms appearing in EPA pub's., news releases, & other Agency documents. The definitions do not constitute the Agency's official use of terms for regulatory purposes; official terminology may be found in the laws & related regulations as published in such sources as the Congressional Record, Federal Register, & elsewhere. These terms are derived from previously published lists, internal glossaries produced by various programs & specific suggestions made by personnel in many Agency offices. The chemicals & pesticides selected for inclusion are limited to those most frequently referred to in Agency pub's. or that are the subject of major regulatory or program activities.

Managing the nation's air quality is a complex undertaking, involving tens of thousands of people in regulating thousands of pollution sources. The authors identify what has worked and what has not, and they offer wide-ranging recommendations for setting future priorities, making difficult choices, and increasing innovation. This new book explores how to better integrate scientific advances and new technologies into the air quality management system. The volume reviews the three-decade history of governmental efforts toward cleaner air, discussing how air quality standards are set and results measured, the design and implementation of control strategies, regulatory processes and procedures, special issues with mobile pollution sources, and more. The book looks at efforts to spur social and behavioral changes that affect air quality, the effectiveness of market-based instruments for air quality regulation, and many other aspects of the issue. Rich in technical detail, this book will be of interest to all those engaged in air quality management: scientists, engineers, industrial managers, law makers, regulators, health officials, clean-air advocates, and concerned citizens.

Human beings need to breathe oxygen diluted in certain quantity of inert gas for living. In the atmosphere, there is a gas mixture of, mainly, oxygen and nitrogen, in appropriate proportions. However, the air also contains other gases, vapours and aerosols that humans incorporate when breathing and whose composition and concentration vary spatially. Some of these are physiologically inert. Air pollution has become a problem of major concern in the last few decades as it has caused negative effects on human health, nature and properties. This book presents the results of research studies carried out by international researchers in seventeen chapters which can be grouped into two main sections: a) air quality monitoring and b) air quality assessment and management, and serves as a source of material for all those involved in the field, whether as a student, scientific researcher, industrialist, consultant, or government agency with responsibility in this area.

The main objective of these updated global guidelines is to offer health-based air quality guideline levels, expressed as long-term or short-term concentrations for six key air pollutants: PM2.5, PM10, ozone, nitrogen dioxide, sulfur dioxide and carbon monoxide. In addition, the guidelines provide interim targets to guide reduction efforts of these pollutants, as well as good practice statements for the management of certain types of PM (i.e., black carbon/elemental carbon, ultrafine particles, particles originating from sand and duststorms). These guidelines are not legally binding standards; however, they provide WHO Member States with an evidence-informed tool, which they can use to inform legislation and policy. Ultimately, the goal of these guidelines is to help reduce levels of air pollutants in order to decrease the enormous health burden resulting from the exposure to air pollution worldwide.

With the quality of indoor air ranking highly in our lives, this second, completely, revised edition now includes 12 completely new chapters addressing both chemical and analytical aspects of organic pollutants. Sources of indoor air pollutants, measurement and detection as well as evaluation are covered filling the gap in the literature caused by this topical subject. This book is divided into four clearly defined parts: measuring organic indoor pollutants, investigation concepts and quality guidelines, field studies, and emission studies. The authors cover physico-chemical fundamentals of organic pollutants, relevant definitions and terminology, emission sources, sampling techniques and instrumentation, exposure assessment as well as methods for control. Test methods and studies for various indoor environments are described, such as automobile interiors, museum environments, or rooms with air ventilation. Emission sources covered include household and consumer products as well as electronic devices and office equipment. The book is aimed at chemists, physicists, biologists, and medical doctors at universities and research facilities, in industry and environmental laboratories as well as regulative bodies.