Modular Remediation Testing Systems documents a unique modular testing environment designed for use in the development of remediation technology and for on-site selection of remedial technologies. This complete design and operation manual gives you the tools you need to conduct successful, cost effective remediation projects. The major attributes of this system, the Experimental Controlled Release System (ECRS), that distinguish it from past test facilities include the following: Portable - shippable to the researcher's location or remediation site Tightly sealable - facilitates mass balance Large pilot-scale facility - step below full-scale demonstration Flexible testing conditions - vadose zone or aquifer, chemical release or contaminated soil, air sparging or SVE Easy to construct - design drawings developed, standard equipment Easy to operate and maintain - easy access, standard equipment Affordable - easily shipped and set up, reduced regulatory requirements, minimal maintenance Faster tests - reduced or eliminated permitting, operate within one week of arrival, programmable for 24-hour duration This monograph presents key information needed to design, construct, and operate similar modular remediation testing systems or to utilize the two existing modular ECRS facilities. The well-sealed, above-ground modular system design minimizes leaks to the environment, facilitates mass balances, and controls test conditions. This allows for multiple uses with minimal permitting. Modular Remediation Testing Systems is a comprehensive reference for researchers in environmental engineering and for engineering consultants and regulators looking for a pilot-scale system. These pilot-scale systems are uniquely suited to both research development and real-world application at remediation sites.

A part of the continuing effort to provide innovative in situ remediation techniques, Remediation of Firing-Range Impact Berms presents the results of a soil washing and leaching project. The demonstration set as its primary objective providing reliable, detailed performance data to evaluate the feasibility and cost of implementing a full-scale sys

A $19.3 million Department of Defense grant to Rice University funds the Advanced Applied Technology Demonstration Facility (AATDF). One of the project goals is the development of reduction strategies for nonaqueous phase liquids (NAPLs) in the subsurface. Surfactants and Cosolvents for NAPL Remediation records the results of AATDF research. The manual is a guide to the practical application of surfactants/cosolvent for in situ remediation. It is targeted to decision makers and anyone concerned with the design or implementation of these technologies. The book discusses the situational viability of surfactants/cosolvents , the possible results, design, and operation. It includes case studies, step-by-step guidance, and project cost work sheets. The successful results of the AATDF research, as documented Surfactants and Cosolvents for NAPL Remediation, are an invaluable contribution to the future of subsurface remediation. Without source NAPL reduction, the alternative is decades of plume management through pump-and-treat.

Interest in phytoremediation as a solution for contaminants in groundwater and soil has exploded. The project documented in Phytoremediation of Hydrocarbon Contaminated Soils presents innovative technology for environmental clean up using in situ treatment. It describes the results of a field study focusing on hydrocarbon contamination, especially polynuclear aromatic hydrocarbons, in surface and near surface soils. The field demonstration used soils contaminated with aged diesel fuels. The random block design enabled the investigators to test the statistical difference in the effects of different vegetated and unvegetated treatments. They tested the degradation of diesel and polynuclear aromatic hydrocarbon components in plots containing three different vegetation treatments, two grasses and a legume, and a non-vegetated control. Part one of the monograph gives a complete and thorough account of the results of the field study. Part two covers the design and potential costs of a full-scale implementation of the demonstration system as well as the performance and potential application of the new technology. Phytoremediation of Hydrocarbon Contaminated Soils supplies quantitative results about the use of vegetation in soil remediation. The information given on the niches and limitations of the technologies allows for a more informed selection of remedial solutions for environmental cleanup.

​This volume provides a review of the past 10 to 15 years of intensive research, development and demonstrations that have been on the forefront of developing bioaugmentation into a viable remedial technology. This volume provides both a primer on the basic microbial processes involved in bioaugmentation, as well as a thorough summary of the methodology for implementing the technology. This reference volume will serve as a valuable resource for environmental remediation professionals who seek to understand, evaluate, and implement bioaugmentation.

A synthesis of years of interdisciplinary research and practice, the second edition of this bestseller continues to serve as a primary resource for information on the assessment, remediation, and control of contamination on and below the ground surface. Practical Handbook of Soil, Vadose Zone, and Ground-Water Contamination: Assessment, Prev

While innovative technologies in remediation need to be developed, so do innovative ways of site assessment. This monograph describes the development, testing, and performance of a new laser-induced fluorescence soil probe. A screening tool for site characterization, this probe has the potential to provide an economical, rapid assessment of contaminated sites. Cone Penetrometer testing equipment advances the probe into the subsurface. The probe identifies hydrocarbon classes using a multi-channel excitation-emission matrix. This technique facilitates the collection of significant amounts of subsurface information - surpassing conventional data collection methods - that can be used to rapidly identify areas of concern beneath a site. The technology has significant application for the following: Rapid environmental site assessment Monitoring remediation programs Monitoring manufacturing processes and industrial waste water operations Subsurface Contamination Monitoring Using Laser Fluorescence provides comprehensive reference material for researchers and engineers as well as engineering consultants interested in subsurface monitoring techniques or further development of this technology. It describes innovative technology that focuses on finding cost effective solutions for site assessment and remediation.