Manufacture of components from powders frequently requires a compaction step. Modelling of Powder Die Compaction presents a number of case studies that have been developed to test compaction models. It will be bought by researchers involved in developing models of powder compaction as well as by those working in industry, either using powder compaction to make products or using products made by powder compaction.

This book contains 25 papers from the NATO Advanced Research Workshop on Recent Advances of Computer Modeling of Powder Metallurgy Processes. The papers address cold compaction, sintering, high-temperature compaction, processing modeling, and processes and materials. The integration of mechanical and physical aspects of P/M processes is emphasized. Contributors include researchers from Europe, the United States, Korea, and Japan. Author index only. c. Book News Inc

This book first presents different approaches to modeling of the cold spray process with the aim of extending current understanding of its fundamental principles and then describes emerging applications of cold spray. In the coverage of modeling, careful attention is devoted to the assessment of critical and erosion velocities. In order to reveal the phenomenological characteristics of interface bonding, severe, localized plastic deformation and material jet formation are studied. Detailed consideration is also given to the effect of macroscopic defects such as interparticle boundaries and subsequent splat boundary cracking on the mechanical behavior of cold spray coatings. The discussion of applications focuses in particular on the repair of damaged parts and additive manufacturing in various disciplines from aerospace to biomedical engineering. Key aspects include a systematic study of defect shape and the ability of cold spray to fill the defect, examination of the fatigue behavior of coatings for structural applications, and a novel working window at subcritical conditions to obtain porous structures. This book is exceptional in scope, and its review of finite element modelling at different length scales sheds light on future design and process improvement in emerging applications such as structural repair, metal additive manufacturing and metal foam design.

Warm compaction is a cost saving and effective method for obtaining high performance powder metallurgy (PM) parts. This chapter presents the principles of warm compaction and technical aspects of the process. The green and sintered properties of warm compacted parts are discussed and compared with conventionally (cold) produced compacts. The applications of the process for ferrous and non-ferrous PM parts are presented and future trends are outlined.