Chlorinated solvents like tetrachloroethene (PCE) and trichloroethene (TCE) are the most common detected groundwater contaminants at Department of Defense installations in the United States. Unfortunately, technologies conventionally used to remediate chlorinated solvent-contaminated groundwater often fall short of achieving regulatory goals. Natural attenuation of chlorinated solvents offers an alternative remediation strategy that may achieve goals. However, the processes involved with natural attenuation are not fully understood, and this lack of understanding has hindered acceptance of natural attenuation by regulatory agencies. This study involved use of a numerical model that incorporated the physical, chemical, and biological processes thought to be relevant to the fate and transport of chlorinated ethenes in the subsurface. The model was used to conduct a parameter sensitivity analysis, to investigate the effect of non-linear and rate-limited sorption processes on the natural attenuation of chlorinated ethenes. The model showed that both rate-limited and non-linear sorption resulted in early arrival of contaminant at wells downgradient of a source area, as well as persistence of contamination at the wells for long periods of time.

Volume 3: Engineering Modeling and Sustainability. This 3-volume reference presents the latest findings in impact assessment of recycled hazardous waste materials on surface and ground waters. Topics covered include chemodynamics, toxicology, modeling and information systems. The book serves as a practical guide for the monitoring, design, management, or conduct of environmental impact assessment. Each volume contains the table of contents of all volumes.

The symposium included 600 presentations in 50 sessions on bioremediation and supporting technologies used for a wide range of contaminants already in, or poised to invade, soil, groundwater, and sediment. Three hundred and fifty-two papers were selected and organized into ten volumes. Volume two's articles address the use of natural attenuation to remediate sites with a variety of hydrocarbons and chlorinated compounds contaminating porous media and groundwater. Methods of encouraging naturally occurring microbial activity are discussed, along with sampling, assessment, and long-term monitoring techniques and devices. Articles average eight pages and contain abstracts and references. Annotation copyrighted by Book News Inc., Portland, OR.

In the past decade, officials responsible for clean-up of contaminated groundwater have increasingly turned to natural attenuation-essentially allowing naturally occurring processes to reduce the toxic potential of contaminants-versus engineered solutions. This saves both money and headaches. To the people in surrounding communities, though, it can appear that clean-up officials are simply walking away from contaminated sites. When is natural attenuation the appropriate approach to a clean-up? This book presents the consensus of a diverse committee, informed by the views of researchers, regulators, and community activists. The committee reviews the likely effectiveness of natural attenuation with different classes of contaminants-and describes how to evaluate the "footprints" of natural attenuation at a site to determine whether natural processes will provide adequate clean-up. Included are recommendations for regulatory change. The committee emphasizes the importance of the public's belief and attitudes toward remediation and provides guidance on involving community stakeholders throughout the clean-up process. The book explores how contamination occurs, explaining concepts and terms, and includes case studies from the Hanford nuclear site, military bases, as well as other sites. It provides historical background and important data on clean-up processes and goes on to offer critical reviews of 14 published protocols for evaluating natural attenuation.

At hundreds of thousands of commercial, industrial, and military sites across the country, subsurface materials including groundwater are contaminated with chemical waste. The last decade has seen growing interest in using aggressive source remediation technologies to remove contaminants from the subsurface, but there is limited understanding of (1) the effectiveness of these technologies and (2) the overall effect of mass removal on groundwater quality. This report reviews the suite of technologies available for source remediation and their ability to reach a variety of cleanup goals, from meeting regulatory standards for groundwater to reducing costs. The report proposes elements of a protocol for accomplishing source remediation that should enable project managers to decide whether and how to pursue source remediation at their sites.