Engineering materials show a pronounced heterogeneity on a smaller scale that influences the macroscopic constitutive behavior. Algorithms for the periodic discretization of microstructures are presented. These are used within the Nonuniform Transformation Field Analysis (NTFA) which is an order reduction based nonlinear homogenization method with micro-mechanical background. Theoretical and numerical aspects of the method are discussed and its computational efficiency is validated.

Wir präsentieren einen Algorithmus zur schnellen Erzeugung von SMC Mikrostrukturen hoher Güte, durch Verwendung einer exakten Schließung und eines quasi-zufälligen Samplings. Darüber hinaus stellen wir ein modulares Framework zur Modellierung anisotroper Schädigung vor. Unser Konzept der Extraktionstensoren und Schädigungsfunktionen ermöglicht die Beschreibung komplexer Vorgänge. Darüber hinaus schlagen wir einen ganzheitlichen Multiskalenansatz zur Bestimmung anisotroper Versagenskriterien vor. - We introduce an algorithm that allows for a fast generation of SMC composite microstructures. An exact closure approximation and a quasi-random orientation sampling ensure high fidelity. Furthermore, we present a modular framework for anisotropic damage evolution. Our concept of extraction tensors and damage-hardening functions enables the description of complex damage-degradation. In addition, we propose a holistic multiscale approach for constructing anisotropic failure criteria.

The mechanical behavior of many applied materials arises from their microstructure. Thus, to aid the design, development and industrialization of new materials, robust computational homogenization methods are indispensable. The present thesis is devoted to investigating and developing FFT-based micromechanics solvers for efficiently computing the (thermo)mechanical response of nonlinear composite materials with complex microstructures.

A physically-based dislocation theory of plasticity is derived within an extended continuum mechanical context. Thermodynamically consistent flow rules at the grain boundaries are derived. With an analytical solution of a three-phase periodic laminate, dislocation pile-up at grain boundaries and dislocation transmission through the grain boundaries are investigated. For the finite element implementations, numerically efficient approaches are introduced based on accumulated field variables.

artensite forms under rapid cooling of austenitic grains accompanied by a change of the crystal lattice. Large deformations are induced which lead to plastic dislocations. In this work a transformation model based on the sharp interface theory, set in a finite strain context is developed. Crystal plasticity effects, the kinetic of the singular surface as well as a simple model of the inheritance from austenite dislocations into martensite are accounted for.

Hot stamping is a hot drawing process which takes advantage of the polymorphic steel behavior to produce parts with a good strength-to-weight ratio. For the simulation of the hot stamping process, a nonlinear two-scale thermomechanical model is suggested and implemented into the FE tool ABAQUS. Phase transformation and transformation induced plasticity effects are taken into account. The simulation results regarding the final shape and residual stresses are compared to experimental findings.