Where flow is limited but high heads of water are available the Pelton wheel is one of the most useful turbines. It can be fabricated in small engineering shops with basic facilities. Jeremy Thake explains how to design, make and use them.

Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.

Provides an overview of various small scale sustainable energy technologies, with examples and a clear focus on technological and research issuesBeginning with an overview of the special characteristics, challenges, and opportunities of small scale power plants, this book goes on to provide detailed assessments of a wide variety of renewable energy generation technologies. Solar, biomass, hydroelectric, and geothermal energy generation are all addressed, with assessment of their performance, availability, reliability unique requirements for operation, maintenance, control, and grid integration.Combining technological advances with consideration of economic and application challenges, the Small Scale Power Generation Handbook is an essential resource for graduate students, academic researchers, and industry professionals involved in the design and integration of small scale power generation for sustainable systems. - Examines a range of cutting-edge renewable small scale generation systems, from photovoltaic to hydropower and bioenergy - Assesses the specific advantages and disadvantages of operation, maintenance, integration, and control alongside conventional grid - Applies technological insights to practical scenarios, case studies, and applications, supporting real-world improvements in sustainability and transition

An essential addition to the Earthscan Planning & Installing series, Planning and Installing Micro-Hydro Systems provides vital diagrams, pictures and tables detailing the planning and installing of a micro-hydro system, including information on the maintenance and economics once an installation is running. The book covers subjects such as measuring head and flow, ecological impacts, scheme layouts, practical advice, calculations and turbine choice. Archimedes screws are also covered in detail, as well as the main conventional choices relevant to small sites. Micro-hydro refers to hydropower systems with a power rating of 100kW or less. A 100kW system will produce 100 standard units of electricity in one hour. These systems have been popular in some sparsely populated or mountainous countries for a number of years, but now new technology, less stringent regulation of grid connected generators and standardised turbine designs are encouraging more widespread interest in micro-hydro in the developed world. The renewable energy sector is growing at a remarkable rate, and whilst much attention has so far focused on solar and wind technologies, Europe and elsewhere have great potential for generating power from small scale hydroelectric installations. This book is aimed at site owners, designers and consultants who are looking to develop schemes in the micro-hydro scale – 5 to 100kW – although the concepts are applicable to smaller and larger schemes.

This book provides users, pump manufactures, engineers, researchers and students with extensive information about pump’s behavior in reverse operation. It reports on cutting-edge methods for selecting the proper PAT and improving PAT’s efficiency, discusses PAT’s reliability, economic issues and environmental impact as well. The book describes in detail electromechanical equipment of PAT systems, their installation and operation, and gives important practical insight into the use of PAT in water transmission and distribution systems, as part of thermal power plants and cooling systems, in oil distribution systems and other systems as well. It reports on different types on PAT control modes as well as on numerical methods useful for PAT analysis and implementation. All in all, the book represents a comprehensive practice-oriented reference-guide to design engineers, as well as PAT general users and manufactures. It also provides researchers with extensive technical information on the use of PAT thus fostering new discussions and ideas to improve current methods and cope with future challenges.