Methods of Estimating Reserves of Crude Oil, Natural Gas, and Natural Gas Liquids, first published in 1965, aims to throw new light on a field of knowledge vital to consideration of problems of public policy regarding future sources of energy. This book will be of interest to students of environmental studies.

Volume 2 presents the industry standards and practices for reservoir engineering and production engineering. It also looks at all aspects of petroleum economics and shows how to estimate oil and gas reserves.

This new edition of the Standard Handbook of Petroleum and Natural Gas Engineering provides you with the best, state-of-the-art coverage for every aspect of petroleum and natural gas engineering. With thousands of illustrations and 1,600 information-packed pages, this text is a handy and valuable reference. Written by over a dozen leading industry experts and academics, the Standard Handbook of Petroleum and Natural Gas Engineering provides the best, most comprehensive source of petroleum engineering information available. Now in an easy-to-use single volume format, this classic is one of the true "must haves" in any petroleum or natural gas engineer's library. - A classic for the oil and gas industry for over 65 years! - A comprehensive source for the newest developments, advances, and procedures in the petrochemical industry, covering everything from drilling and production to the economics of the oil patch - Everything you need - all the facts, data, equipment, performance, and principles of petroleum engineering, information not found anywhere else - A desktop reference for all kinds of calculations, tables, and equations that engineers need on the rig or in the office - A time and money saver on procedural and equipment alternatives, application techniques, and new approaches to problems

The appreciable difference between producible proved reserves and ultimate reserves and resources of hydrocarbon deposits is of such magnitude that much petroleum, natural gas, shale oil, and bitumen will not be produced unless significant technological progress is made in production techniques. The shattering effect of contained nuclear explosives and, to a lesser extent, the heat produced, have been considered as stimulative forces when the thickness, depth, and nature of such deposits permit considering the use of nuclear devices. The technical feasibility of using nuclear explosives cannot be evaluated fully at present. Additional information is needed on the effects of pressure, heat, and radioactivity on the solids and fluids of hydrocarbon deposits, the nature and extent of induced fractures in different rock media, and the possibility of isolating and confining or removing radioactive contaminants. Final technical feasibility can only be determined by a field test. If technical feasibility is established, economic feasibility will depend upon the comparative cost of producing hydrocarbons by nuclear explosives and by conventional means. It is probable that an economic comparison would favor nuclear stimulation only where devices of relatively high yield could be used practicably and safely. (Author).