Understanding corrosion is essential for selecting and maintaining equipment and structural components that will withstand environmental and process conditions effectively. Fundamentals of Metallic Corrosion: Atmospheric and Media Corrosion of Metals focuses on the mechanisms of corrosion as well as the action of various corrodents on metals and th

Corrosion due to water is one of the most significant and complex causes of damage to metallic products. Written from the viewpoint of physical chemistry, this authoritative and established text deals with the aqueous corrosion of metals. Available for the first time in English, Corrosion of Metal addressing engineers, metallurgists, physicists and chemists. This self-contained, valuable reference comprehensively organizes and makes readily accessible the accumulated wealth of fundamental and applied knowledge. The concentration is on the underlying essentials of corrosion and failure, and the material is consistently presented in relation to practical applications to corrosion protection. The first chapters introducing the physicochemical principles are ideal for students. The following chapters provide an overview of the state of research for those familiar with the fundamentals. An exhaustive bibliography and appendices conclude the volume.

Metallic Coatings for Corrosion Control describes how metal coatings can control corrosion, the selection process, preparations, suitability, limitations, and how coatings are applied. The book reviews the nature of corrosion, the forms of corrosion (even general, uneven general, even local, narrow pits, cracking), electrochemical mechanism of corrosion, effects of discontinuities in coatings, and economic considerations of coating. It describes pretreatments (such as removal of superficial corrosion, abrading, polishing), the coating processes (molten or spray application, chemical or vapor deposition, diffusion coating), and also coating performance. The rate of corrosion on different metals such as aluminum, cadmium, copper, gold, silver, or tin depends on the presence of an oxide film, solubility, electrodeposits, or tarnish blackening. Gold is resistant to corrosion and tarnishing except in aqua regia. The book recommends the following when the engineer is selecting a type of coating: the environment where it is exposed, the service life required, the substrate material, shape or size of the article, its decorative appeal, mechanical factors, and if there will be any subsequent fabrication. The book is useful for students of civil, structural, and mechanical engineering. Designers and technicians of industrial machinery or maritime equipment will also profit from reading it.