Industrial and Municipal Sludge: Emerging Concerns and Scope for Resource Recovery begins with a characterization of the types of sludge and their sources and management strategies. This section is followed by specific chapters that cover Emerging contaminants in sludge (Endocrine disruptors, Pesticides and Pharmaceutical residues, including illicit drugs/controlled substances), Bioleaching of sludge [with an enriched sulfur-oxidizing bacterial community, Recovery of valuable metals (Bioleaching and use of sulfur-oxidizing bacterial community, and Biogas production by continuous thermal hydrolysis and thermophilic anaerobic digestion of waste activated sludge. In addition, the book includes numerous tables and flow diagrams to help users further comprehend the subject matter. - Includes numerous tables and flow diagrams to assist in the comprehension of new and existing sludge treatments and resource recovery technology - Covers biogas production by continuous thermal hydrolysis and thermophilic anaerobic digestion of waste activated sludge - Presents information on the recovery of valuable metals from sludge (bioleaching and the use of a sulfur-oxidizing bacterial community) - Includes opportunities and challenges in the biorefinery-based valorization of pulp and paper sludge

Biomethanization of the Organic Fraction of Municipal Solid Wastes is a comprehensive introduction to both the fundamentals and the more practical aspects of the anaerobic digestion of organic solid wastes, particularly those derived from households, that is, the organic fraction of municipal solid wastes (OFMSW). It can be used as a textbook for specialized courses and also as a guide for practitioners. In the first part, the book covers the relevant aspects of anaerobic digestion (AD) of organic wastes. The fundamentals and kinetic aspects of AD are reviewed with particular emphasis on the aspects related to solid wastes. This introduction is necessary to have a comprehensive view of the AD process and to understand the practical principles as well as the origin of possible problems arising from the management of the process. Chapter 2 emphasizes the role of kinetics in designing the reactor, paying special attention to existing models, particularly the dynamic ones. Through this introduction, it is intended to facilitate the technology transfer from laboratory or pilot plant experiences to full-scale process, in order to implement improvements in current digesters. Laboratory methods are described for the analysis and optimization of reactor performance, such as methanogenic activity tests or experimental evaluation of the biodegradation kinetics of solid organic waste. The different reaction patterns applied to industrial reactors are outlined. Industrial reactors are classified in accordance with the system they use, pointing out advantages and limitations. Co-digestion, enabling the co-treatment of organic wastes of different origin in a more economically feasible way, is described in detail. Examples of co-digestion are given, with OFMSW as a base-substrate. Finally, full-scale co-digestion plants are discussed. Various types (mechanical, biological, physico-chemical) of pre-treatment to increase the biodegradability, and thus the yields of the process, are reviewed in detail. The use of the fermentation products of anaerobic digesters for biological nutrient removal processes in wastewater treatment plants is described. This constitutes an example of integrated waste management, a field in which both economic and technical advances can be achieved. Balances are given to justify the approach, and a full-scale case study is presented. The important topic of economics and the ecological advantages of the process are emphasized. The use of compost, the integration with composting technology, and advantages over other technologies are detailed in the framework of an environmental impact assessment of biowaste treatment. Finally, the anaerobic digestion of MSW in landfills is reviewed in detail, with emphasis on landfill process enhancement and strategies for its application.

Wastewater and Biosolids Management covers a wide range of current, new and emerging topics in wastewater and biosolids. The book addresses the theoretical and practical aspect of the reuse and looks to advance our knowledge on wastewater reuse and its application in agricultural production. The book aims to present existing modern information about wastewater reuse management based on earlier literature on the one hand and recent research developments, many of which have not so far been implemented into actual practice on the other. It combines the practical and theoretical knowledge about ‘wastewater and biosolids management’ and in this sense it is useful for researchers, students, academicians as well as for professionals.

The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13

There are many books on the use of numerical methods for solving engineering problems and for modeling of engineering artifacts. In addition there are many styles of such presentations ranging from books with a major emphasis on theory to books with an emphasis on applications. The purpose of this book is hopefully to present a somewhat different approach to the use of numerical methods for - gineering applications. Engineering models are in general nonlinear models where the response of some appropriate engineering variable depends in a nonlinear manner on the - plication of some independent parameter. It is certainly true that for many types of engineering models it is sufficient to approximate the real physical world by some linear model. However, when engineering environments are pushed to - treme conditions, nonlinear effects are always encountered. It is also such - treme conditions that are of major importance in determining the reliability or failure limits of engineering systems. Hence it is essential than engineers have a toolbox of modeling techniques that can be used to model nonlinear engineering systems. Such a set of basic numerical methods is the topic of this book. For each subject area treated, nonlinear models are incorporated into the discussion from the very beginning and linear models are simply treated as special cases of more general nonlinear models. This is a basic and fundamental difference in this book from most books on numerical methods.

This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.