Advanced Mine Ventilation presents the reader with a unique book providing the theory and applications for designing mine ventilation with computers, controlling respirable coal dust and diesel particulate matter, combustible gas control and, mine fire management. The book summarizes the latest knowledge created in the past 40 years in these areas. Authored by an expert in the field with 50 years' experience, the book is a great combination of theory and applications. The mine ventilation section provides computer programs (both FORTRAN and C++) to calculate not only air quantities and pressure losses but also the concentration of any pollutant in all junctions and branches of the mine network. Small particle mechanics and dust control is covered in the second section of the book. The third section on combustible gas control discusses all aspects of mine gases from origin to control. The last section on mine fire control discusses spontaneous combustion, frictional ignitions, mine explosions, and mine sealing and recovery. The book is not only a very good reference book but also an excellent textbook for two graduate level courses in Mining Engineering. - Provides the latest knowledge on the four related topics of mine environment control; that is, ventilation, dust, gas, and fire in a single volume - Computer simulation of mine ventilation in both FORTRAN and C++ - State-of-the-art respirable dust control - Mine degasification and methane production from a coal lease - Mine fire management

Management of Coking Coal Resources provides a one-stop reference that focuses on sustainable mining practices using a four-point approach that includes the economical, governmental, societal, and environmental aspects of coal exploration, coking coal mining, and steelmaking applications. This type of approach galvanizes the excavation, processing methods, and end uses of coal as an energy and steelmaking source, thus ensuring that the supply of coking coal meets the future demands of the rapidly expanding economies in India and other developing countries. The book provides information on the strategic planning and revitalization of India's Jharia coalfield, addressing actionable plans for methods of extraction, master plans for mine fires, subsidence management, land use planning, and sustainable mining. Users will find a multidisciplinary reference that presents the broad range of applications, techniques, and methodologies used in maintaining coking coal quality from exploration through extraction. - Provides a one-stop reference that focuses on sustainable mining practices using a four-point approach - Includes the economical, governmental, societal, and environmental aspects of coal exploration, coking coal mining, and steelmaking applications - Presents information on the strategic planning and revitalization of India's Jharia coalfield - Includes a broad range of the applications, techniques, and methodologies used in maintaining coking coal quality from exploration through extraction

Advanced Reservoir and Production Engineering for Coal Bed Methane presents the reader with design systems that will maximize production from worldwide coal bed methane reservoirs. Authored by an expert in the field with more than 40 years of' experience, the author starts with much needed introductory basics on gas content and diffusion of gas in coal, crucial for anyone in the mining and natural gas industries. Going a step further, chapters on hydrofracking, horizontal drilling technology, and production strategies address the challenges of dewatering, low production rates, and high development costs. This book systematically addresses all three zones of production levels, shallow coal, medium depth coal, and deep coal with coverage on gas extraction and production from a depth of 500 feet to upwards of 10,000 feet, strategies which cannot be found in any other reference book. In addition, valuable content on deep coal seams with content on enhanced recovery, a discussion on CO2 flooding, infra-red heating and even in-situ combustion of degassed coal, giving engineers a greater understanding on how today's shale activities can aid in enhancing production of coal bed for future natural gas production. - Delivers how to recover and degas deeper coal seams while lowering development costs - Addresses both sorption process and irreducible fraction of gas in coal, with examples based on the author's 40 plus years of direct experience - Explains how the same techniques used for production from deep shale activity can produce gas from deep coal seems with the help of enhanced recovery, leading to increased gas production

Advances in Coal Mine Ground Control is a comprehensive text covering all recent advances in coal mine ground control, the most advanced subsystem of the rapidly advancing coal mining systems. This complete resource is written by Professor Syd Peng who, alongside leading experts from the world's major coal producing countries, has contributed extensively to the understanding of subsidence from underground coal mining, longwall operations and ground control in underground mines. Syd and the team of contributors bring together key advances from the past decade into one comprehensive resource that is accessible to all those studying, researching and working in the mining industry. This book is an essential text for undergraduate and graduate students of mining engineering and related programs, and a must-have reference for mining, civil and geotechnical engineers. - Written and edited by the world's leading experts on ground control in coal mining - Covers all aspects of ground control practices in coal mines - Focuses on advances over the past decade, equipping readers with the most up-to-date knowledge regarding current research and practices in the field

This text covers the use of computer applications in the mineral industries, encompassing topics such as the use of computer visualization in mining systems and aspects such as ventilation and safety.

Covering the subject of ground control in mining, this volume looks at such topics as: rock-slab theory of ground pressure in work and practice, the role of in situ-stress in mine planning, and the status of the art of cable bolting.