Here is the revised edition of this popular, practical manual with updated information on everything from on-site preplanning and layout through the construction of footings, foundations, walls, fireplaces, and chimneys. Plus, the book covers improved estimating techniques to help readers win more construction bids and pocket a healthy profit every time. The ideal reference for busy masonry contractors.

This volume provides a concise overview of the main facets of masonry wall construction, including materials, structural design, types of walls, movement, insulation, rain exclusion, site practice, defects and repair. The subject is covered in sufficient depth for a comprehensive introduction with reading lists after each chapter for those interest

Basic Civil Engineering is designed to enrich the preliminary conceptual knowledge about civil engineering to the students of non-civil branches of engineering. The coverage includes materials for construction, building construction, basic surveying and other major topics like environmental engineering, geo-technical engineering, transport traffic and urban engineering, irrigation & water supply engineering and CAD.

A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms