This text shows you how to build your own mind controlled robot. You learn to measure attention level with a NeuroSky headband and send this information into Arduino. You will also build a line-avoiding system into the bot. And, of course, you will build the chassis of your robot from scratch.

This book discusses the basic requirements and constraints in building a brain–computer interaction system. These include the technical requirements for building the signal processing module and the acquisition module. The major aspects to be considered when designing a signal acquisition module for a brain–computer interaction system are the human brain, types and applications of brain–computer systems, and the basics of EEG (electroencephalogram) recording. The book also compares the algorithms that have been and that can be used to design the signal processing module of brain–computer interfaces, and describes the various EEG-acquisition devices available and compares their features and inadequacies. Further, it examines in detail the use of Emotiv EPOC (an EEG acquisition module developed by Emotiv) to build a complete brain–computer interaction system for driving robots using a neural network classification module.

Build a robot that responds to electrical activity in your brain--it's easy and fun. If you're familiar with Arduino and have basic mechanical building skills, this book will show you how to construct a robot that plays sounds, blinks lights, and reacts to signals from an affordable electroencephalography (EEG) headband. Concentrate and the robot will move. Focus more and it will go faster. Let your mind wander and the robot will slow down. The level of attention controls the speed of the robot. Steering (left and right) is controlled with automatic line avoidance. You'll find complete instructions for building a simple robot chassis with servos, wheels, sensors, LEDs, and a speaker. You also get the code to program the Arduino microcontroller to receive wireless signals from the EEG. Your robot will astound anyone who wears the EEG headband.

Building robots that sense and interact with their environment used to be tricky. Now, Arduino makes it easy. With this book and an Arduino microcontroller and software creation environment, you'll learn how to build and program a robot that can roam around, sense its environment, and perform a wide variety of tasks. All you to get started with the fun projects is a little programming experience and a keen interest in electronics. Make a robot that obeys your every command-or runs on its own. Maybe you're a teacher who wants to show students how to build devices that can move, sense, respon.

Provides instructions on how to build robots that sense and interact with their environment using an Arduino microcontroller and software creation environment to make a robot that can roam around, sense its environment, and perform various tasks.

This book will show you how to use your Arduino to control a variety of different robots while providing step-by-step instructions on the entire robot building process. You'll learn Arduino basics as well as the characteristics of different types of motors used in robotics. You also discover controller methods and failsafe methods and learn how to apply them to your project.

To build electronic projects that can sense the physical world, you need to build circuits based around sensors: electronic components that react to physical phenomena by sending an electrical signal. Even with only basic electronic components, you can build useful and educational sensor projects. But if you incorporate Arduino or Raspberry Pi into your project, you can build much more sophisticated projects that can react in interesting ways and even connect to the Internet. This book starts by teaching you the basic electronic circuits to read and react to a sensor. It then goes on to show how to use Arduino to develop sensor systems, and wraps up by teaching you how to build sensor projects with the Linux-powered Raspberry Pi.