Written for use by operating organizations of nuclear power plants and regulatory bodies, this Safety Guide provides specific recommendations on maintenance, testing, surveillance and inspection to ensure that the levels of reliability and availability of all structures, systems and components important to safety remain in accordance with the assumptions and intent of the design, and also that the safety of the plant is not adversely affected after the commencement of operation. The publication covers the establishment and implementation of preventive and corrective maintenance programmes; testing surveillance and inspection; the repair of defective plant equipment; the provision of related facilities and equipment; procurement; and generating and retaining records of maintenance activities.

This Safety Guide provides specific recommendations on the maintenance, periodic testing and inspection of research reactors to meet the relevant requirements of IAEA Safety Standards Series No. SSR-3, Safety of Research Reactors. It provides guidance on design considerations and recommends good practices in implementing the programme and establishing the organization and responsibilities for maintenance, periodic testing and inspection as well as for the selection, training and qualification of personnel. Procedures, administrative controls and maintenance facilities are also covered as well as procurement and storage of spare parts and components, and testing and inspection methods and techniques used for maintenance, periodic testing and inspection. The recommendations provided in this Safety Guide are aimed at operating organizations of research reactors, regulatory bodies and other organizations involved in a research reactor project. This Safety Guide is a revision of IAEA Safety Standards Series No. NS-G-4.2, which it supersedes.

Written for use by regulatory bodies and the operating organizations of nuclear power plants, this Safety Guide addresses the commissioning, operation and preparation for decommissioning stages for a nuclear power plant. The role of the operating organization in the siting, design, manufacturing and construction of a nuclear power plant is outside the scope. In most States, the operating organization is the legal entity responsible for safety, financial and commercial obligations, as well as other obligations that are connected with the operation of a nuclear power plant. This Safety Guide is solely concerned with those responsibilities and obligations that are necessary to ensure the safe operation of the nuclear power plant(s) under the control of the operating organization.

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

The recommendations provided in this Safety Guide are aimed primarily at operating organizations of nuclear power plants and regulatory bodies. It covers the concept of operational limits and conditions (OLCs), their content as applicable to nuclear power plants, and the responsibilities of the operating organization for their establishment, modification, compliance and documentation. Operating procedures (including emergency operating procedures and severe accident management guidelines) to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide.