This book describes several methods and systems solving one of the highlighted problems within computer aided design, namely architectural and logic synthesis. The book emphasises the most recent technologies in high level synthesis, concentrating on applicative studies and practical constraints or criteria during synthesis. Logic and Architecture Synthesis concentrates on the practical problems involving automatic synthesis of designs. It is essential reading for researchers and CAD Managers working in this area.

This book provides a single-source reference to the state-of-the-art in logic synthesis. Readers will benefit from the authors’ expert perspectives on new technologies and logic synthesis, new data structures, big data and logic synthesis, and convergent logic synthesis. The authors describe techniques that will enable readers to take advantage of recent advances in big data techniques and frameworks in order to have better logic synthesis algorithms.

This book describes the synthesis of logic functions using memories. It is useful to design field programmable gate arrays (FPGAs) that contain both small-scale memories, called look-up tables (LUTs), and medium-scale memories, called embedded memories. This is a valuable reference for both FPGA system designers and CAD tool developers, concerned with logic synthesis for FPGAs.

This volume contains the proceedings of the 4th International Workshop on Field-Programmable Logic and Applications (FPL '94), held in Prague, Czech Republic in September 1994. The growing importance of field-programmable devices is substantiated by the remarkably high number of 116 submissions for FPL '94; from them, the revised versions of 40 full papers and 24 high-quality poster presentations were accepted for inclusion in this volume. Among the topics treated are: testing, layout, synthesis tools, compilation research and CAD, trade-offs and experience, innovations and smart applications, FPGA-based computer architectures, high-level design, prototyping and ASIC emulators, commercial devices, new tools, CCMs and HW/SW co-design, modelers, educational experience, and novel architectures.

Short turnaround has become critical in the design of electronic systems. Software- programmable components such as microprocessors and digital signal processors have been used extensively in such systems since they allow rapid design revisions. However, the inherent performance limitations of software-programmable systems mean that they are inadequate for high-performance designs. Designers thus turned to gate arrays as a solution. User-programmable gate arrays (field-programmable gate arrays, FPGAs) have recently emerged and are changing the way electronic systems are designed and implemented. The growing complexity of the logic circuits that can be packed onto an FPGA chip means that it has become important to have automatic synthesis tools that implement logic functions on these architectures. Logic Synthesis for Field-Programmable Gate Arrays describes logic synthesis for both look-up table (LUT) and multiplexor-based architectures, with a balanced presentation of existing techniques together with algorithms and the system developed by the authors. Audience: A useful reference for VLSI designers, developers of computer-aided design tools, and anyone involved in or with FPGAs.

Logic synthesis has become a fundamental component of the ASIC design flow, and Logic Synthesis Using Synopsys® has been written for all those who dislike reading manuals but who still like to learn logic synthesis as practised in the real world. The primary focus of the book is Synopsys Design Compiler®: the leading synthesis tool in the EDA marketplace. The book is specially organized to assist designers accustomed to schematic capture based design to develop the required expertise to effectively use the Compiler. Over 100 `classic scenarios' faced by designers using the Design Compiler have been captured and discussed, and solutions provided. The scenarios are based both on personal experiences and actual user queries. A general understanding of the problem-solving techniques provided will help the reader debug similar and more complicated problems. Furthermore, several examples and dc-shell scripts are provided. Specifically, Logic Synthesis Using Synopsys® will help the reader develop a better understanding of the synthesis design flow, optimization strategies using the Design Compiler, test insertion using the Test Compiler®, commonly used interface formats such as EDIF and SDF, and design re-use in a synthesis-based design methodology. Examples have been provided in both VHDL and Verilog. Audience: Written with CAD engineers in mind to enable them to formulate an effective synthesis-based ASIC design methodology. Will also assist design teams to better incorporate and effectively integrate synthesis with their existing in-house design methodology and CAD tools.

This book describes RTL design, synthesis, and timing closure strategies for SOC blocks. It covers high-level RTL design scenarios and challenges for SOC design. The book gives practical information on the issues in SOC and ASIC prototyping using modern high-density FPGAs. The book covers SOC performance improvement techniques, testing, and system-level verification. The book also describes the modern Xilinx FPGA architecture and their use in SOC prototyping. The book covers the Synopsys DC, PT commands, and use of them to constraint and to optimize SOC design. The contents of this book will be of use to students, professionals, and hobbyists alike.