Local heat transfer, equilibrium temperatures, and pressure have been measured on a circular cylinder for yaw angles from 0° to 60° and Reynolds numbers from 1X106 to 4X106. Increasing the yaw angle from 0° to 40° generally caused large increases in local heat-transfer coefficients followed by a decrease as the yaw angle was increased to 60°. The level of heating rates and the type if chordwise distribution indicated that a flow mechanism different from the conventional transitional boundary layer may exist for the intermediate yaw angles.

The ability to predict and control viscous flow phenomena is becoming increasingly important in modern industrial application. The Instability and Transition Workshop at Langley was extremely important in help§ ing the scientists community to access the state of knowledge in the area of transition from laminar to turbulent flow, to identify promising future areas of research and to build future interactions between researchers worldwide working in the areas of theoretical, experimental and computational fluid and aero dynamics. The set of two volume contains panel discussions and research contribution with the following objectives: (1) expose the academic community to current technologically important issues of instability and transitions in shear flows over the entire speed range, (2) acquaint the academic community with the unique combination of theoretical, computational and experimental capabilities at LaRC and foster interaction with these facilities. (3) review current state-of-the-art and propose future directions for instability and transition research, (4) accelerate progress in elucidating basic understanding of transition phenomena and in transferring this knowledge into improved design methodologies through improved transition modeling, and (5) establish mechanism for continued interaction.

A New Edition of the Most Effective Text/Reference in the Field! Aerodynamics, Aeronautics, and Flight Mechanics, Second Edition Barnes W. McCormick, Pennsylvania State University 57506-2 When the first edition of Aerodynamics, Aeronautics, and Flight Mechanics was published, it quickly became one of the most important teaching and reference tools in the field. Not only did generations of students learn from it, they continue to use it on the job-the first edition remains one of the most well-thumbed guides you'll find in an airplane company. Now this classic text/reference is available in a bold new edition. All new material and the interweaving of the computer throughout make the Second Edition even more practical and current than before! A New Edition as Complete and Applied as the First Both analytical and applied in nature, Aerodynamics, Aeronautics, and Flight Mechanics presents all necessary derivations to understand basic principles and then applies this material to specific examples. You'll find complete coverage of the full range of topics, from aerodynamics to propulsion to performance to stability and control. Plus, the new Second Edition boasts the same careful integration of concepts that was an acclaimed feature of the previous edition. For example, Chapters 9, 10, and 11 give a fully integrated presentation of static, dynamic, and automatic stability and control. These three chapters form the basis of a complete course on stability and control. New Features You'll Find in the Second Edition * A new chapter on helicopter and V/STOL aircraft- introduces a phase of aerodynamics not covered in most current texts * Even more material than the previous edition, including coverage of stealth airplanes and delta wings * Extensive use of the computer throughout- each chapter now contains several computer exercises * A computer disk with programs written by the author is available