The subject of liquid crystals and their use in electronic displays and in non-linear optical systems has become of tremendous importance during the last decade; and the incorporation of liquid crystal units into polymeric materials has led to a group of new materials with diverse properties. Some of these properties have been utilized in new products and some have yet to be used. Much published work has appeared that deals with specific materials or particular applications, and it was felt that a book was needed to examine and explain the underlying principles governing the diverse properties of these liquid crystal polymers, LCPs. The current work describes the diverse nature of LCPs, their synthesis, characterization, properties and finally their applications. It describes the manner in which liquid crystallinity or mesomorphism occurs in small molecules, monomer liquid crystals and polymer liquid crystals. Chapter 1 gives a classification of the various ways in which the meso gens may be connected to the polymer chains. Currently, the bulk of LCP material is based on main chain or longitudinal LCPs for use in engineering applications. The side chain or comb polymers are intended for use in electronics and opto-electronic systems and as surfactants. Many other variants and possibilities exist but their properties have not yet been fully studied or used. In this respect it is hoped that the current work will indicate future possibilities as well as discussing current opinion. v Preface vi Chapters 2 and 3 describe methods of characterizing the mesophases.

Polymer Liquid Crystals covers the significant developments in the field of highlight oriented polymers. This 12-chapter book emerged from lectures presented during the seminar "Polymer Liquid Crystals: Science and Technology", held at Santa Margherita Ligure, Italy on May 19-23, 1981. The opening chapters highlight the molecular basis of liquid crystallinity. The subsequent chapters deal with the synthesis, structure, properties, and macroscopic phenomena of polymer liquid crystals. These topics are followed by descriptions of the orientation of liquid crystals, specifically the instabilities in low molecular weight nematic and cholesteric liquid crystals. The final chapters consider the applications of these crystals to display devices and the advances in high-strength fibers and molecular composites. This book will be of great value to polymer liquid crystal chemists and researchers.

This volume contains an eclectic collection of 22 papers on liquid crystalline polymers presented at the Sixth Polymer Workshop, in the series sponsored by the European Science Foundation, entitled: 'Liquid Crystal Polymer Systems', in Gentofte, Denmark, 12-14 September 1983. Since a contribution to this volume was strictly voluntary, and in some cases represents a considerably expanded version of that which was presented, it is strictly speaking not correct to term this a 'proceedings'. A description of the aims and purposes of the European Science Foundation with respect to the polymer area has been presented in: Shell Polymers, Vol. 5, No.2, pp. 34-35, 1981. The papers given here represent a cross-section of current research interests in liquid crystalline polymers in the areas of theory, synthesis, characterization, structure-property relationships and applications. At least some of the current interest is motivated by attempts to practically exploit the novel properties of these materials in the developing tech nologies of high strength fibres and advanced materials for constructional purposes, but also for functional materials in the areas of information retrieval, electronics and opto-electronics applications. The editor wishes to thank all those involved for their courtesy and co-operation.

Polarized Light in Liquid Crystals and Polymers deals with the linear optics of birefringent materials, such as liquid crystals and polymers, and surveys light propagation in such media with special attention to applications. It is unique in treating light propagation in micro- and nanostructured birefringent optical elements, such as lenses and gratings composed of birefringent materials, as well as the spatial varying anisotropic structures often found in miniaturized liquid crystal devices.

Annotation Liquid crystal polymers are sometimes called super polymers--with good reason. Their wide range of exceptional properties and ease of processing make them design candidates for many demanding applications. This new book provides a thorough review of LCP technology with the emphasis on the chemistry, synthesis and characterization of the material in its many variants. Additional chapters cover processing and applications. From the Editor's Preface The field of thermotropic liquid crystalline polymers has grown substantially in the last two decades, with fundamental research, publications, commercial products, and patents. In the 1980's, Dr. Ralph Miano led my colleagues and me at Hoechst Celanese in commercializing the first thermotropic liquid crystalline polymers, based on Dr. Gordon Calundann's composition patents. Today, more than seven companies have produced thermotropic liquid crystalline polymer materials, with at least 50 variants available. Hence, it is timely to compile a comprehensive review on the nature of this type of material and the ongoing progress in this field€. The goals of this book are to summarize previous work, provide new insights into this class of polymers, and add to the understanding of the formation of liquid crystallinity. This book covers a wide range of topics and addresses different disciplines in the field. The chapters are arranged as a learning scheme for the professional, from basic science to applied engineering. The first few chapters summarize the syntheses of various polyester, polyester-amid, and polyimide liquid crystalline polymers. The science and origins of liquid crystal formation are revealed. Next, we introduce the characterizations of these materials by their different chemical and physical aspects. Because most commercially available thermotropic liquid crystalline polymers have been used in the form of composites, we have also incorporated a chapter on polymer blends, detailing blending mechanisms and resultant properties. Two chapters on thermosetting liquid crystalline polymers integrate them with other topics, because of their unique importance and their applications for microelectronics and packaging. The final chapter deals with the engineering and processing aspects of thermoplastic liquid crystalline polymers for a variety of applications.

Among the various new directions in modern polymer science, the design and investigation of liquid crystal (LC) polymers have been the ones growing most actively and fruitfully. In spite of that, the possible formation of an anisotropic LC phase was only demonstrated theoretically for the first time in the 1950s by Onsager [1] and Flory [2], and then experimentally verified in the studies with polypeptides solutions. In essence, the studies of these LC lyotropic systems did not deviate from the theme of purely academic interest. It was at the beginning of the 1970s that the experimental "explosion" occurred, when aromatic polyamides were synthesized and their ability to form LC solutions in certain very aggressive solvents was discovered. The search for practical applications of such LC systems was crowned with the successful creation of the new generation of ultrastrong high-modulus ther mostable fibers, such as the Kevlar, due to the high degree of order of the macromolecules in the anisotropic LC state. In fact, these investigations coincided with the swift emergence on the practical "scene" of thermotropic low-molar-mass liquid crystals, with the use of these materials in microelectronics and electro optics (figures and let ters indicators, displays in personal computers, and flat TV, etc.). Polymer scientists also began to develop methods of synthesizing thermotropic LC polymers by incorporating mesogenic fragments in the main (main-chain LC polymers) or side branchings of the macromolecules (side-chain or comb shaped polymers).

This text is a primer for liquid crystals, polymers, rubber and elasticity. It is directed at physicists, chemists, material scientists, engineers and applied mathematicians at the graduate student level and beyond.