An industrial radiographer was accidentally over-exposed while taking the radiograph of weld-joints of gas pipe-lines in 1985 in Bangladesh. Symptoms of high radiation exposure occurred immediately after the accident and skin erythema developed leading to progressive tissue deterioration. The consequences of this over-exposure is being followed up to assess the long-term effects of ionizing radiation on the victim. Progressive tissue deteriorations have already led to multiple surgeries and successive amputations of the finger-tips so far. Lessons learned from this accident are also reported in this paper.

This Safety Report contains the findings of extensive research in terms of the lessons that can be learned from accidents which have occurred in industrial radiography, both in developed and developing countries. The review was carried out by a team of regulatory authorities, manufacturers and safety advisers. The objectives were to draw lessons from the initiating events of the accidents, the contributing factors and the consequences, and to identify several measures that, if implemented, would improve safety performance in industrial radiography.

This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information explaining the responsibilities of regulatory authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of enhancing radiation protection and safety.

Under the Convention on Assistance in the Case of a Nuclear or Radiological Emergency, the Peruvian authorities requested assistance from the IAEA in relation to the radiological accident that occurred during non-destructive testing using a nuclear radioactive source in the district of Chilca, Peru, in 2012. This assistance related to dose assessment and medical management of those involved in the accident was provided during 2012 and 2013. The report gives a detailed account and analysis of the event, as well as, the actions taken in order to assist organizations responsible for radiation protection, source safety and emergency preparedness and response in identifying lessons to be learned that may help to prevent similar accidents.

This publication provides guidance for designing and implementing radiotherapy programmes, taking into account clinical, medical physics, radiation protection and safety aspects. It reflects current requirements for radiotherapy infrastructure in settings with limited resources. It will be of use to professionals involved in the development, implementation and management of radiotherapy programmes

In February 1999 a serious radiological accident occurred in Yanango, Peru, when a welder picked up an 192Ir industrial radiography source and put it in his pocket for several hours. This action resulted in his receiving a high radiation dose that necessitated the amputation of one leg. His wife and children were also exposed, but to a much less extent. The purpose of this report is to provide an account of the circumstances of the accident and its medical aspects.