Design for Additive Manufacturing is a complete guide to design tools for the manufacturing requirements of AM and how they can enable the optimization of process and product parameters for the reduction of manufacturing costs and effort. This timely synopsis of state-of-the-art design tools for AM brings the reader right up-to-date on the latest methods from both academia and industry. Tools for both metallic and polymeric AM technologies are presented and critically reviewed, along with their manufacturing attributes. Commercial applications of AM are also explained with case studies from a range of industries, thus demonstrating best-practice in AM design. - Covers all the commonly used tools for designing for additive manufacturing, as well as descriptions of important emerging technologies - Provides systematic methods for optimizing AM process selection for specific production requirement - Addresses design tools for both metallic and polymeric AM technologies - Includes commercially relevant case studies that showcase best-practice in AM design, including the biomedical, aerospace, defense and automotive sectors

In order to compete in the current commercial environment companies must produce greater product variety, at lower cost, all within a reduced product life cycle. To achieve this, a concurrent engineering philosophy is often adopted. In many cases the main realization of this is Design for Manufacture and Assembly (DFM/A). There is a need for in-depth study of the architectures for DFM/A systems in order that the latest software and knowledge-based techniques may be used to deliver the DFM/A systems of tomorrow. This architecture must be based upon complete understanding of the issues involved in integrating the design and manufacturing domains. This book provides a comprehensive view of the capabilities of advanced DFM/A systems based on a common architecture.

This book focuses on numerical simulations of manufacturing processes, discussing the use of numerical simulation techniques for design and analysis of the components and the manufacturing systems. Experimental studies on manufacturing processes are costly, time consuming and limited to the facilities available. Numerical simulations can help study the process at a faster rate and for a wide range of process conditions. They also provide good prediction accuracy and deeper insights into the process. The simulation models do not require any pre-simulation, experimental or analytical results, making them highly suitable and widely used for the reliable prediction of process outcomes. The book is based on selected proceedings of AIMTDR 2016. The chapters discuss topics relating to various simulation techniques, such as computational fluid dynamics, heat flow, thermo-mechanical analysis, molecular dynamics, multibody dynamic analysis, and operational modal analysis. These simulation techniques are used to: 1) design the components, 2) to investigate the effect of critical process parameters on the process outcome, 3) to explore the physics of the process, 4) to analyse the feasibility of the process or design, and 5) to optimize the process. A wide range of advanced manufacturing processes are covered, including friction stir welding, electro-discharge machining, electro-chemical machining, magnetic pulse welding, milling with MQL (minimum quantity lubrication), electromagnetic cladding, abrasive flow machining, incremental sheet forming, ultrasonic assisted turning, TIG welding, and laser sintering. This book will be useful to researchers and professional engineers alike.

This text includes papers covering topics in geometry processing applications, such as surface-surface intersections and offset surfaces. Present methods fundamental to geometric modelling are highlighted.

Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.

Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.