Actuating materials hold a promise for fast-spreading applications in smart structures and active control systems, and have attracted extensive attention from scientists of both mechanics and materials sciences communities. High performance and stability of actuating materials and structures play a decisive role in their successive applications as sensors and actuators in structural control and robotics. The advances of actuating materials, however, recently encountered a severe reliability issue. For a better understanding toward this issue, scientific efforts are of paramount significance to gain a deep insight into the intricate deformation and failure behaviors of actuating materials. To examine the state of the art in this subject, the general assembly of IUTAM approved in August, 2002 at Cambridge University, UK, a proposal to hold an IUTAM symposium to summarize the relevant research findings. The main themes of the symposium are: (i) the constitutive relations of actuating materials that couple mechanical, electrical, thermal and magnetic properties, as well as incorporate phase transformation and domain switch; (ii) the physical mechanisms of deformation, damage, and fatigue crack growth of actuating materials; (iii) the development of failure-resilient approaches that base on the macro-, meso-, and micro-mechanics analyses; (iv) the investigation of microstructural evolution, stability of phase transformation, and size effects of ferroelectric ceramics, shape memory alloys, actuating polymers, and bio-actuating materials. The above problems represent an exciting challenge and form a research thrust of both materials science and solid mechanics. The IUTAM Symposium (GA.

Theory of Electroelasticity analyzes the stress, strain, electric field and electric displacement in electroelastic structures such as sensors, actuators and other smart materials and structures. This book also describes new theories such as the physical variational principle and the inertial entropy theory. It differs from the traditional method by using the physical variational principle to derive the governing equations of the piezoelectric material, whereas the Maxwell stress is obtained automatically. By using the inertial entropy theory, the temperature wave equation is obtained very easily. The book is intended for scientists, researchers and engineers in the areas of mechanics, physics, smart material and control engineering as well as mechanical, aeronautical and civil engineering, etc. Zhen-Bang Kuang is a professor at Shanghai Jiao Tong University.

This is a state-of-the-art treatise on the problems of both nonlinearity and uncertainty in the dynamics and control of engineering systems. The concept of dynamics and control implies the combination of dynamic analysis and control synthesis. It is essential to gain insight into the dynamics of a nonlinear system with uncertainty if any new control strategy is designed to utilize nonlinearity.

This symposium is the seventh of a series of IUTAM sponsored symposia which focus on probabilistic methods in mechanics. It is the sequel to the series of meetings in Coventry, UK (1972), Southhampton, UK (1976), Frankfurt/Oder, Germany (1982), Stockholm, Sweden (1984), Innsbruck/Igls, Austria (1987), and Turin, Italy (1991). The symposium focused on advances in the area of probabilistic mechanics with direct application to structural reliability issues. The contributed papers address collectively the four components of a structural reliability problem. They are: characterization of stochastic loads, description of material properties in terms of fatigue and fracture, response determination, and quantitative assessment of the reliability of the structural system. Four Keynote Lectures by V. Bolotin (Russia), o. Ditlevsen (Denmark), R. Heller (USA), and F. Ziegler (Austria) were delivered; the remaining contributed papers were organized in ten technical sessIons. A reception was hosted by Dr. Y. Wu the first day of the symposium; the second day of the symposium a banquet was hosted by Dr. P. Spanos, with Dr. N. Abramson serving as the banquet speaker. Closing remarks were provided by the IUTAM Secretary General, Dr. F. Ziegler.

This volume contains the proceedings of the IUTAM Symposium on Elastohydrodynamics and Microelastohydrodynamics held in Cardiff from 1-3 September 2004. It contains 31 articles by leading researchers in the field. The symposium focused on theoretical, experimental and computational issues in elastohydrodynamic lubrication (EHL) both in relation to smooth surfaces and in situations where the film is of the same order or thinner than the surface roughness (micro-EHL). The last IUTAM Symposium in this general area of contact of deformable bodies was in 1974. The emphasis in the Symposium was upon fundamental issues such as: solution methods; lubricant rheological models, thermal effects; both low and high elastic modulus situations; human and replacement joints; fluid traction; dynamic effects, asperity lubrication and the failure of lubrication; surface fatigue and thermal distress under EHL conditions. The book will be useful to those active in basic elastohydrodynamics research who wish to gain an up-to-date understanding of the subject from leading experts in the field.

This volume offers edited papers presented at the IUTAM-Symposium Topological design optimization of structures, machines and materials - status and perspectives, October 2005. The papers cover the application of topological design optimization to fluid-solid interaction problems, acoustics problems, and to problems in biomechanics, as well as to other multiphysics problems. Also in focus are new basic modelling paradigms, covering new geometry modelling such as level-set methods and topological derivatives.