Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.

Guidelines for Mine Waste Dump and Stockpile Design is a comprehensive, practical guide to the investigation, design, operation and monitoring of mine waste dumps, dragline spoils and major stockpiles associated with large open pit mines. These facilities are some of the largest man-made structures on Earth, and while most have performed very well, there are cases where instabilities have occurred with severe consequences, including loss of life and extensive environmental and economic damage. Developed and written by industry experts with extensive knowledge and experience, this book is an initiative of the Large Open Pit (LOP) Project. It comprises 16 chapters that follow the life cycle of a mine waste dump, dragline spoil or stockpile from site selection to closure and reclamation. It describes the investigation and design process, introduces a comprehensive stability rating and hazard classification system, provides guidance on acceptability criteria, and sets out the key elements of stability and runout analysis. Chapters on site and material characterisation, surface water and groundwater characterisation and management, risk assessment, operations and monitoring, management of ARD, emerging technologies and closure are included. A chapter is also dedicated to the analysis and design of dragline spoils. Guidelines for Mine Waste Dump and Stockpile Design summarises the current state of practice and provides insight and guidance to mine operators, geotechnical engineers, mining engineers, hydrogeologists, geologists and other individuals that are responsible at the mine site level for ensuring the stability and performance of these structures. Readership includes mining engineers, geotechnical engineers, civil engineers, engineering geologists, hydrogeologists, environmental scientists, and other professionals involved in the site selection, investigation, design, permitting, construction, operation, monitoring, closure and reclamation of mine waste dumps and stockpiles.

This report presents the results of a study to review the current practice and develop practical guidelines for geotechnical investigation, analysis and design of mine dumps in B.C. While it is recognized that environmental, land use and related issues must also be addressed, they are not the focus of this document. As part of the study, a survey of dumps at 31 active mines was undertaken and synopses on 83 individual dumps were prepared and are included. Contributions to the guide were solicited from mine operators, regulatory agencies, research and industry groups, and geotechnical consultants.

The book is a comprehensive treatment of the application of geotechnical engineering to site selection, site exploration, design, operation and closure of mine waste storage facilities.The level and content are suitable as a technical source and reference for practising engineers engaged both in the design and operational management of mine waste s

Negative environmental events make the headlines. Mining industry examples are the recent incidents at Summitville, Colorado, US, and the cyanide leak at Cambria Resource's Omai Operation in Guyana. In this volatile atmosphere, the publication of the Mining Environmental Handbook comes at an opportune time. It presents an objective, comprehensive and integrated examination of the effects of mining on the environment, and the environmental laws that deal with mining. Though stressing activities in the United States of America, it covers all of North America.North American environmental standards are currently being exported around the world. Consequently, this handbook will be of prime interest in countries that are now coming to terms with mining environmentalism. It should benefit working engineers and environmentalists, manufacturers, legislators, regulators, financiers and journalists. It has been selected as a university textbook. Finally, it will be an indispensable reference during serious discussions about mining environmentalism.

This SME classic is both a reference book for the working engineer and a textbook for the mining student. This hardcover edition gives a brief history of surface mining and a general overview of the state of surface mining today--topics range from production and productivity to technological developments and trends in equipment. This extremely useful text takes the approach that exploration and mining geologists must be expert in a number of fields, including basic finance and economics, logistics, and pragmatic prospecting. Readers will find material on all these topics and more. The book's nine chapters include: Introduction, Exploration and Geology Techniques, Ore Reserve Estimation, Feasibility Studies and Project Financing, Planning and Design of Surface Mines, Mine Operations, Mine Capital and Operating Costs, Management and Organization, and Case Studies. The book is fully indexed.