Residual stresses are always introduced in materials when they are produced, or when they undergo non-uniform plastic deformation during use. The circumstances that can cause residual stresses are therefore numerous. Residual stresses exist in all materials and, depending on their distribution, can playa beneficial role (for example, compressive surface stress) or have a catastrophic effect, especially on fatigue behaviour and corrosion properties. The subject of residual stresses took form around 1970 with the development of methods to measure macroscopic deformations during the machining of materials or on an atomic scale by X-ray diffraction. These techniques have made considerable progress in the last 20 years. The meetings organized in several countries (Germany, France, Japan, etc. ) have largely contributed to this progress, aided by the numerous exchanges of information and knowledge to which they have given rise. Studies of the formation of residual stresses began more slowly, but have progressed with the emergence of increasingly realistic models of materials behaviour and with access to ever more powerful codes for numerical calculations. Two successive meetings for discussing this topic have been held in Europe. The first, held in 1982 in Nancy (France), consisted of 30 participants from 5 countries. The second was held in Linkoping (Sweden) in 1984, with 80 participants of 16 nationalities. It was decided to hold a first International Conference, ICRS, to address all aspects of the problem. Held in 1986 in Garmisch-Partenkirschen (FRG), it was an assembly of neady 300 participants from 21 countries.

This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.

Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)

This book is a collection of papers presented at the 5th International Conference on Rehabilitation and Maintenance in Civil Engineering (ICRMCE 2021), held in Surakarta, Indonesia. The papers are grouped into sequential themes representing the structure of this book: o Part 1: Factors affecting building and infrastructure performance o Part 2: Testing and inspection of existing building and infrastructure o Part 3: Protection, maintenance, repair, and retrofitting of building and infrastructure o Part 4: Maintenance management of building and infrastructure o Part 5: Service life modelling of building and infrastructure o Part 6: Hazard mitigation o Part 7: Sustainability aspect in civil engineering design, process, modelling, maintenance, and rehabilitation Postgraduate students, researchers, and practitioners specializing and working in the area of protection, maintenance, repair, and retrofitting of civil engineering infrastructures will find this book very useful.

This volume presents the processing of the 15th ICMBE held from 4th to 7th December 2013, Singapore. Biomedical engineering is applied in most aspects of our healthcare ecosystem. From electronic health records to diagnostic tools to therapeutic, rehabilitative and regenerative treatments, the work of biomedical engineers is evident. Biomedical engineers work at the intersection of engineering, life sciences and healthcare. The engineers would use principles from applied science including mechanical, electrical, chemical and computer engineering together with physical sciences including physics, chemistry and mathematics to apply them to biology and medicine. Applying such concepts to the human body is very much the same concepts that go into building and programming a machine. The goal is to better understand, replace or fix a target system to ultimately improve the quality of healthcare. With this understanding, the conference proceedings offer a single platform for individuals and organizations working in the biomedical engineering related field to gather and network with each other in so doing create the catalyst for future development of biomedical engineering in Asia.

ICSSD 2002 is the second in the series of International Conferences on Structural Stability and Dynamics, which provides a forum for the exchange of ideas and experiences in structural stability and dynamics among academics, engineers, scientists and applied mathematicians. Held in the modern and vibrant city of Singapore, ICSSD 2002 provides a peep at the areas which experts on structural stability and dynamics will be occupied with in the near future. From the technical sessions, it is evident that well-known structural stability and dynamic theories and the computational tools have evolved to an even more advanced stage. Many delegates from diverse lands have contributed to the ICSSD 2002 proceedings, along with the participation of colleagues from the First Asian Workshop on Meshfree Methods and the International Workshop on Recent Advances in Experiments and Computations on Modeling of Heterogeneous Systems. Forming a valuable source for future reference, the proceedings contain 153 papers OCo including 3 keynote papers and 23 invited papers OCo contributed by authors from all over the world who are working in advanced multi-disciplinary areas of research in engineering. All these papers are peer-reviewed, with excellent quality, and cover the topics of structural stability, structural dynamics, computational methods, wave propagation, nonlinear analysis, failure analysis, inverse problems, non-destructive evaluation, smart materials and structures, vibration control and seismic responses.The major features of the book are summarized as follows: a total of 153 papers are included with many of them presenting fresh ideas and new areas of research; all papers have been peer-reviewed and are grouped into sections for easy reference; wide coverage of research areas is provided and yet there is good linkage with the central topic of structural stability and dynamics; the methods discussed include those that are theoretical, analytical, computational, artificial, evolutional and experimental; the applications range from civil to mechanical to geo-mechanical engineering, and even to bioengineering."

This book presents select proceedings of the 2nd International Conference on Innovative Materials, Manufacturing and Advanced Technologies (IMMAT'2022), held in Sousse, Tunisia, on October 27-29, 2022. The covered topics include theoretical, experimental and technological works and its application in various challenging domains like materials sciences, mechanical design, manufacturing, environment and heat transfer. The volume provides an overview of innovations and technological advances in mechanical engineering. Given the selected and peer reviewed papers, it will be a useful resource for practitioners working on cutting-edge topics in several areas related to the mechanics such as mechanical behavior, material-process interaction, fatigue behavior, tribological behavior of surfaces, manufacturing, organization and optimization of production processes, additive manufacturing processes, renewable energy, design of lightweight components, robotics and industry 4.0. This book is intended to serve researchers, engineers and professionals working in the fields of material and mechanical engineering.