Separation processes—or processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixture—are essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.

Separation processes on an industrial scale account for well over half of the capital and operating costs in the chemical industry. Knowledge of these processes is key for every student of chemical or process engineering. This book is ideally suited to university teaching, thanks to its wealth of exercises and solutions. The second edition boasts an even greater number of applied examples and case studies as well as references for further reading.

Separation science plays a critical role in maintaining our standard of living and quality of life. Many industrial processes and general necessities such as chemicals, medicines, clean water, safe food, and energy sources rely on chemical separations. However, the process of chemical separations is often overlooked during product development and this has led to inefficiency, unnecessary waste, and lack of consensus among chemists and engineers. A reevaluation of system design, establishment of standards, and an increased focus on the advancement of separation science are imperative in supporting increased efficiency, continued U.S. manufacturing competitiveness, and public welfare. A Research Agenda for Transforming Separation Science explores developments in the industry since the 1987 National Academies report, Separation and Purification: Critical Needs and Opportunities. Many needs stated in the original report remain today, in addition to a variety of new challenges due to improved detection limits, advances in medicine, and a recent emphasis on sustainability and environmental stewardship. This report examines emerging chemical separation technologies, relevant developments in intersecting disciplines, and gaps in existing research, and provides recommendations for the application of improved separation science technologies and processes. This research serves as a foundation for transforming separation science, which could reduce global energy use, improve human and environmental health, and advance more efficient practices in various industries.

Separation operations are crucial throughout the process industry with respect to energy consumption, contribution to investments and ability to achieve the desired product with the right specifications. Our main objective in creating this graduate level textbook is to present an overview of the fundamentals underlying the most frequently used industrial separation methods. We focus on their physical principles and the basic computation methods that are required to assess their technical and economical feasibility. The textbook is organized into three main parts. Separation processes for homogeneous mixtures are treated in the parts on equilibrium based molecular separations and rate-controlled molecular separations. The part on mechanical separation technology presents an overview of the most important techniques for heterogeneous mixture separation. Each chapter provides a condensed overview of the most commonly used equipment types. The textbook is concluded with a final chapter on the main considerations in selecting an appropriate separation process for a separation task. As the design of separation processes can only be learned by doing, we have included exercises at the end of each chapter. Short answers are given at the end of this book; detailed solutions are given in a separate solution manual.

Membrane science and technology is an expanding field and has become a prominent part of many activities within the process industries. It is relatively easy to identify the success stories of membranes such as desali nation and microfiltration and to refer to others as developing areas. This, however, does not do justice to the wide field of separations in which membranes are used. No other 'single' process offers the same potential and versatility as that of membranes. The word separation classically conjures up a model of removing one component or species from a second component, for example a mass transfer process such as distillation. In the field of synthetic membranes, the terminology 'separation' is used in a wider context. A range of separations of the chemical/mass transfer type have developed around the use of membranes including distillation, extraction, absorption, adsorption and stripping, as well as separations of the physical type such as filtration. Synthetic membranes are an integral part of devices for analysis, energy generation and reactors (cells) in the electrochemical industry.

Industrial Chemical Process Analysis and Design uses chemical engineering principles to explain the transformation of basic raw materials into major chemical products. The book discusses traditional processes to create products like nitric acid, sulphuric acid, ammonia, and methanol, as well as more novel products like bioethanol and biodiesel. Historical perspectives show how current chemical processes have developed over years or even decades to improve their yields, from the discovery of the chemical reaction or physico-chemical principle to the industrial process needed to yield commercial quantities. Starting with an introduction to process design, optimization, and safety, Martin then provides stand-alone chapters—in a case study fashion—for commercially important chemical production processes. Computational software tools like MATLAB®, Excel, and Chemcad are used throughout to aid process analysis. - Integrates principles of chemical engineering, unit operations, and chemical reactor engineering to understand process synthesis and analysis - Combines traditional computation and modern software tools to compare different solutions for the same problem - Includes historical perspectives and traces the improving efficiencies of commercially important chemical production processes - Features worked examples and end-of-chapter problems with solutions to show the application of concepts discussed in the text

Separation Process Essentials provides an interactive approach for students to learn the main separation processes (distillation, absorption, stripping, and solvent extraction) using material and energy balances with equilibrium relationships, while referring readers to other more complete works when needed. Membrane separations are included as an example of non-equilibrium processes. This book reviews and builds on material learned in the first chemical engineering courses such as Material and Energy Balances and Thermodynamics as applied to separations. It relies heavily on example problems, including completely worked and explained problems followed by "Try This At Home" guided examples. Most examples have accompanying downloadable Excel spreadsheet simulations. The book also offers a complementary website, http://separationsbook.com, with supplementary material such as links to YouTube tutorials, practice problems, and the Excel simulations. This book is aimed at second and third year undergraduate students in Chemical engineering, as well as professionals in the field of Chemical engineering, and can be used for a one semester course in separation processes and unit operations.