In January 1996 a total of 270 conference participants gathered for 3 days in Trondheim, Norway, to focus on and to discuss the complex topic of hydrocarbon seals particularly related to deformation zones and to caprocks. The conference was the first in Norway and one of the first in Europe to exclusively address this very important subject. The purpose of the conference was to present some of the most recent research results, to establish state-of-the-art with respect to understanding hydrocarbon seals and to discuss where to go from here to find some of the keys to successful future exploration and enhanced oil and gas recovery. Out of the presented papers and posters, 17 are compiled and published in this volume. These provide a good overview of and an introduction to the numerous aspects covered during the fruitful days in Trondheim.

This book explains in detail how to use oil and gas show information to find hydrocarbons. It covers the basics of exploration methodologies, drilling and mud systems, cuttings and mud gas show evaluation, fundamental log analysis, the pitfalls of log-calculated water saturations, and a complete overview of the use of pressures to understand traps and migration, hydrodynamics, and seal and reservoir quantification using capillary pressure. Also included are techniques for quickly generating pseudo-capillary pressure curves from simple porosity/permeability data, with examples of how to build spreadsheets in Excel, and a complete treatment of fluid inclusion analysis and fluid inclusion stratigraphy to map migration pathways. In addition, petroleum systems modeling and fundamental source rock geochemistry are discussed in depth, particularly in the context of unconventional source rock evaluation and screening tools for entering new plays. The book is heavily illustrated with numerous examples and case histories from the author’s 37 years of exploration experience. The topics covered in this book will give any young geoscientist a quick start on a successful career and serve as a refresher for the more experienced explorer.

This volume contains 17 selected papers reflecting the flavour of the Norwegian Petroleum Society conference on hydrocarbon seals quantification and showing the recent significant advances in the understanding and application of hydrocarbon seal methodologies.Three broad categories are covered in this book: methodologies addressing cap-rock integrity, methodologies relating to fault seal and case studies both from the hydrocarbon basins of Northwestern Europe and in the form of outcrop examples. With the North Sea, Norwegian Sea and Atlantic Margin moving along their respective basin maturity and development curves, exploration is being forced deeper into high pressure/high temperature terrains, while exploitation and development requires greater precision and realism in reservoir simulations to maximise drilling strategies to prolong field life. In all instances the need for predictive tools and methodologies that address the integrity and behaviour of top and lateral (fault) seals to hydrocarbon traps, both in the static and dynamic state, have been identified as key risk factors and this is reflected in this volume.

Faults commonly trap fluids such as hydrocarbons and water and therefore are of economic significance. During hydrocarbon field development, smaller faults can provide baffles and/or conduits to flow. There are relatively simple, well established workflows to carry out a fault seal analysis for siliciclastic rocks based primarily on clay content. There are, however, outstanding challenges related to other rock types, to calibrating fault seal models (with static and dynamic data) and to handling uncertainty. The variety of studies presented here demonstrate the types of data required and workflows followed in today’s environment in order to understand the uncertainties, risks and upsides associated with fault-related fluid flow. These studies span all parts of the hydrocarbon value chain from exploration to production but are also of relevance for other industries such as radioactive waste and CO2 containment.