High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. - Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases - Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys - Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings

The European Collaborative Programme on Materials for Gas Turbines known as COST-50 was initiated in 1971 and has been supported since then by the Commission of European Communities. The achievements made during the first phase of COST-50 were reviewed at the Conference held in Liege, September 25-27, 1978 and published by Applied Science Publishers Ltd. Nine European Countries : Austria, Belgium, the Federal Republic of Germany, France, Italy, The Netherlands, Sweden, Switzerland, the United Kingdom, and the Joint Research Center of the Community, agreed to continue their participation in COST-50 and the results of the second phase were presented at the Conference held in Liege, October 4-6, 1982 under the following headings : - Corrosion and Coatings - Fatigue, Creep and Structural Stability - Processing The technical sessions consisted of invited papers reviewing recent progress in the development of high temperature alloys with particular emphasis on the results of the European Collaborative Programme. Furthermore, some areas were reviewed by eminent speakers from the United States of America, due to their expertise in their respective fields. In this context and as a tradition introduced in 1978, the keynote lecture "Superalloys technology : today and tomorrow" was del ivered by Dr. F. L. Versnyder. The Conference was completed with a significant Poster Session comprising about fifty contributions from Europe and elsewhere. This book comprises a total of fifty four contributions representing almost all of the papers delivered at the technical sessions and a large part of the presentations made at the Poster Session.

George Lai's 1990 book, High-Temperature Corrosion of Engineering Alloys, is recognized as authoritative and is frequently consulted and often cited by those in the industry. His new book, almost double in size with seven more chapters, addresses the new concerns, new technologies, and new materials available for those engaged in high-temperature applications. As we strive for energy efficiency, the realm of high-temperature environments is expanding and the need for information on high temperature materials applications was never greater. In addition to extensive expansion on most of the content of the original book, new topics include erosion and erosion-corrosion, low NOx combustion in coal-fired boilers, fluidized bed combustion, and the special demands of waste-to-energy boilers, waste incinerators, and black liquor recovery boilers in the pulp and paper industry. The corrosion induced by liquid metals is discussed and protection options are presented.

A comprehensive review of the latest developments in the pursuit of superalloys.